# -*- coding: utf-8 -*-

# Copyright (c) 2013, Mahmoud Hashemi
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
#    * Redistributions of source code must retain the above copyright
#      notice, this list of conditions and the following disclaimer.
#
#    * Redistributions in binary form must reproduce the above
#      copyright notice, this list of conditions and the following
#      disclaimer in the documentation and/or other materials provided
#      with the distribution.
#
#    * The names of the contributors may not be used to endorse or
#      promote products derived from this software without specific
#      prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


# Coding decl above needed for rendering the emdash properly in the
# documentation.

"""
Module ``ioutils`` implements a number of helper classes and functions which
are useful when dealing with input, output, and bytestreams in a variety of
ways.
"""
import os
from io import BytesIO, IOBase
from abc import (
    ABCMeta,
    abstractmethod,
    abstractproperty,
)
from errno import EINVAL
from codecs import EncodedFile
from tempfile import TemporaryFile

try:
    from itertools import izip_longest as zip_longest # Python 2
except ImportError:
    from itertools import zip_longest  # Python 3

try:
    text_type = unicode  # Python 2
    binary_type = str
except NameError:
    text_type = str      # Python 3
    binary_type = bytes

READ_CHUNK_SIZE = 21333
"""
Number of bytes to read at a time. The value is ~ 1/3rd of 64k which means that
the value will easily fit in the L2 cache of most processors even if every
codepoint in a string is three bytes long which makes it a nice fast default
value.
"""


class SpooledIOBase(IOBase):
    """
    A base class shared by the SpooledBytesIO and SpooledStringIO classes.

    The SpooledTemporaryFile class is missing several attributes and methods
    present in the StringIO implementation. This brings the api as close to
    parity as possible so that classes derived from SpooledIOBase can be used
    as near drop-in replacements to save memory.
    """
    __metaclass__ = ABCMeta

    def __init__(self, max_size=5000000, dir=None):
        self._max_size = max_size
        self._dir = dir

    def _checkClosed(self, msg=None):
        """Raise a ValueError if file is closed"""
        if self.closed:
            raise ValueError('I/O operation on closed file.'
                             if msg is None else msg)
    @abstractmethod
    def read(self, n=-1):
        """Read n characters from the buffer"""

    @abstractmethod
    def write(self, s):
        """Write into the buffer"""

    @abstractmethod
    def seek(self, pos, mode=0):
        """Seek to a specific point in a file"""

    @abstractmethod
    def readline(self, length=None):
        """Returns the next available line"""

    @abstractmethod
    def readlines(self, sizehint=0):
        """Returns a list of all lines from the current position forward"""

    def writelines(self, lines):
        """
        Write lines to the file from an interable.

        NOTE: writelines() does NOT add line separators.
        """
        self._checkClosed()
        for line in lines:
            self.write(line)

    @abstractmethod
    def rollover(self):
        """Roll file-like-object over into a real temporary file"""

    @abstractmethod
    def tell(self):
        """Return the current position"""

    @abstractproperty
    def buffer(self):
        """Should return a flo instance"""

    @abstractproperty
    def _rolled(self):
        """Returns whether the file has been rolled to a real file or not"""

    @abstractproperty
    def len(self):
        """Returns the length of the data"""

    def _get_softspace(self):
        return self.buffer.softspace

    def _set_softspace(self, val):
        self.buffer.softspace = val

    softspace = property(_get_softspace, _set_softspace)

    @property
    def _file(self):
        return self.buffer

    def close(self):
        return self.buffer.close()

    def flush(self):
        self._checkClosed()
        return self.buffer.flush()

    def isatty(self):
        self._checkClosed()
        return self.buffer.isatty()

    @property
    def closed(self):
        return self.buffer.closed

    @property
    def pos(self):
        return self.tell()

    @property
    def buf(self):
        return self.getvalue()

    def fileno(self):
        self.rollover()
        return self.buffer.fileno()

    def truncate(self, size=None):
        """
        Truncate the contents of the buffer.

        Custom version of truncate that takes either no arguments (like the
        real SpooledTemporaryFile) or a single argument that truncates the
        value to a certain index location.
        """
        self._checkClosed()
        if size is None:
            return self.buffer.truncate()

        if size < 0:
            raise IOError(EINVAL, "Negative size not allowed")

        # Emulate truncation to a particular location
        pos = self.tell()
        self.seek(size)
        self.buffer.truncate()
        if pos < size:
            self.seek(pos)

    def getvalue(self):
        """Return the entire files contents."""
        self._checkClosed()
        pos = self.tell()
        self.seek(0)
        val = self.read()
        self.seek(pos)
        return val

    def seekable(self):
        return True

    def readable(self):
        return True

    def writable(self):
        return True

    def __next__(self):
        self._checkClosed()
        line = self.readline()
        if not line:
            pos = self.buffer.tell()
            self.buffer.seek(0, os.SEEK_END)
            if pos == self.buffer.tell():
                raise StopIteration
            else:
                self.buffer.seek(pos)
        return line

    next = __next__

    def __len__(self):
        return self.len

    def __iter__(self):
        self._checkClosed()
        return self

    def __enter__(self):
        self._checkClosed()
        return self

    def __exit__(self, *args):
        self._file.close()

    def __eq__(self, other):
        if isinstance(other, self.__class__):
            self_pos = self.tell()
            other_pos = other.tell()
            try:
                self.seek(0)
                other.seek(0)
                eq = True
                for self_line, other_line in zip_longest(self, other):
                    if self_line != other_line:
                        eq = False
                        break
                self.seek(self_pos)
                other.seek(other_pos)
            except Exception:
                # Attempt to return files to original position if there were any errors
                try:
                    self.seek(self_pos)
                except Exception:
                    pass
                try:
                    other.seek(other_pos)
                except Exception:
                    pass
                raise
            else:
                return eq
        return False

    def __ne__(self, other):
        return not self.__eq__(other)

    def __bool__(self):
        return True

    def __del__(self):
        """Can fail when called at program exit so suppress traceback."""
        try:
            self.close()
        except Exception:
            pass

    __nonzero__ = __bool__


class SpooledBytesIO(SpooledIOBase):
    """
    SpooledBytesIO is a spooled file-like-object that only accepts bytes. On
    Python 2.x this means the 'str' type; on Python 3.x this means the 'bytes'
    type. Bytes are written in and retrieved exactly as given, but it will
    raise TypeErrors if something other than bytes are written.

    Example::

        >>> from boltons import ioutils
        >>> with ioutils.SpooledBytesIO() as f:
        ...     f.write(b"Happy IO")
        ...     _ = f.seek(0)
        ...     isinstance(f.getvalue(), ioutils.binary_type)
        True
    """

    def read(self, n=-1):
        self._checkClosed()
        return self.buffer.read(n)

    def write(self, s):
        self._checkClosed()
        if not isinstance(s, binary_type):
            raise TypeError("{} expected, got {}".format(
                binary_type.__name__,
                type(s).__name__
            ))

        if self.tell() + len(s) >= self._max_size:
            self.rollover()
        self.buffer.write(s)

    def seek(self, pos, mode=0):
        self._checkClosed()
        return self.buffer.seek(pos, mode)

    def readline(self, length=None):
        self._checkClosed()
        if length:
            return self.buffer.readline(length)
        else:
            return self.buffer.readline()

    def readlines(self, sizehint=0):
        return self.buffer.readlines(sizehint)

    def rollover(self):
        """Roll the StringIO over to a TempFile"""
        if not self._rolled:
            tmp = TemporaryFile(dir=self._dir)
            pos = self.buffer.tell()
            tmp.write(self.buffer.getvalue())
            tmp.seek(pos)
            self.buffer.close()
            self._buffer = tmp

    @property
    def _rolled(self):
        return not isinstance(self.buffer, BytesIO)

    @property
    def buffer(self):
        try:
            return self._buffer
        except AttributeError:
            self._buffer = BytesIO()
        return self._buffer

    @property
    def len(self):
        """Determine the length of the file"""
        pos = self.tell()
        if self._rolled:
            self.seek(0)
            val = os.fstat(self.fileno()).st_size
        else:
            self.seek(0, os.SEEK_END)
            val = self.tell()
        self.seek(pos)
        return val

    def tell(self):
        self._checkClosed()
        return self.buffer.tell()


class SpooledStringIO(SpooledIOBase):
    """
    SpooledStringIO is a spooled file-like-object that only accepts unicode
    values. On Python 2.x this means the 'unicode' type and on Python 3.x this
    means the 'str' type. Values are accepted as unicode and then coerced into
    utf-8 encoded bytes for storage. On retrieval, the values are returned as
    unicode.

    Example::

        >>> from boltons import ioutils
        >>> with ioutils.SpooledStringIO() as f:
        ...     f.write(u"\u2014 Hey, an emdash!")
        ...     _ = f.seek(0)
        ...     isinstance(f.read(), ioutils.text_type)
        True

    """
    def __init__(self, *args, **kwargs):
        self._tell = 0
        super(SpooledStringIO, self).__init__(*args, **kwargs)

    def read(self, n=-1):
        self._checkClosed()
        ret = self.buffer.reader.read(n, n)
        self._tell = self.tell() + len(ret)
        return ret

    def write(self, s):
        self._checkClosed()
        if not isinstance(s, text_type):
            raise TypeError("{} expected, got {}".format(
                text_type.__name__,
                type(s).__name__
            ))
        current_pos = self.tell()
        if self.buffer.tell() + len(s.encode('utf-8')) >= self._max_size:
            self.rollover()
        self.buffer.write(s.encode('utf-8'))
        self._tell = current_pos + len(s)

    def _traverse_codepoints(self, current_position, n):
        """Traverse from current position to the right n codepoints"""
        dest = current_position + n
        while True:
            if current_position == dest:
                # By chance we've landed on the right position, break
                break

            # If the read would take us past the intended position then
            # seek only enough to cover the offset
            if current_position + READ_CHUNK_SIZE > dest:
                self.read(dest - current_position)
                break
            else:
                ret = self.read(READ_CHUNK_SIZE)

            # Increment our current position
            current_position += READ_CHUNK_SIZE

            # If we kept reading but there was nothing here, break
            # as we are at the end of the file
            if not ret:
                break

        return dest

    def seek(self, pos, mode=0):
        """Traverse from offset to the specified codepoint"""
        self._checkClosed()
        # Seek to position from the start of the file
        if mode == os.SEEK_SET:
            self.buffer.seek(0)
            self._traverse_codepoints(0, pos)
            self._tell = pos
        # Seek to new position relative to current position
        elif mode == os.SEEK_CUR:
            start_pos = self.tell()
            self._traverse_codepoints(self.tell(), pos)
            self._tell = start_pos + pos
        elif mode == os.SEEK_END:
            self.buffer.seek(0)
            dest_position = self.len - pos
            self._traverse_codepoints(0, dest_position)
            self._tell = dest_position
        else:
            raise ValueError(
                "Invalid whence ({0}, should be 0, 1, or 2)".format(mode)
            )
        return self.tell()

    def readline(self, length=None):
        self._checkClosed()
        ret = self.buffer.readline(length).decode('utf-8')
        self._tell = self.tell() + len(ret)
        return ret

    def readlines(self, sizehint=0):
        ret = [x.decode('utf-8') for x in self.buffer.readlines(sizehint)]
        self._tell = self.tell() + sum((len(x) for x in ret))
        return ret

    @property
    def buffer(self):
        try:
            return self._buffer
        except AttributeError:
            self._buffer = EncodedFile(BytesIO(), data_encoding='utf-8')
        return self._buffer

    @property
    def _rolled(self):
        return not isinstance(self.buffer.stream, BytesIO)

    def rollover(self):
        """Roll the buffer over to a TempFile"""
        if not self._rolled:
            tmp = EncodedFile(TemporaryFile(dir=self._dir),
                              data_encoding='utf-8')
            pos = self.buffer.tell()
            tmp.write(self.buffer.getvalue())
            tmp.seek(pos)
            self.buffer.close()
            self._buffer = tmp

    def tell(self):
        """Return the codepoint position"""
        self._checkClosed()
        return self._tell

    @property
    def len(self):
        """Determine the number of codepoints in the file"""
        pos = self.buffer.tell()
        self.buffer.seek(0)
        total = 0
        while True:
            ret = self.read(READ_CHUNK_SIZE)
            if not ret:
                break
            total += len(ret)
        self.buffer.seek(pos)
        return total


def is_text_fileobj(fileobj):
    if getattr(fileobj, 'encoding', False):
        # codecs.open and io.TextIOBase
        return True
    if getattr(fileobj, 'getvalue', False):
        # StringIO.StringIO / cStringIO.StringIO / io.StringIO
        try:
            if isinstance(fileobj.getvalue(), type(u'')):
                return True
        except Exception:
            pass
    return False


class MultiFileReader(object):
    """Takes a list of open files or file-like objects and provides an
    interface to read from them all contiguously. Like
    :func:`itertools.chain()`, but for reading files.

       >>> mfr = MultiFileReader(BytesIO(b'ab'), BytesIO(b'cd'), BytesIO(b'e'))
       >>> mfr.read(3).decode('ascii')
       u'abc'
       >>> mfr.read(3).decode('ascii')
       u'de'

    The constructor takes as many fileobjs as you hand it, and will
    raise a TypeError on non-file-like objects. A ValueError is raised
    when file-like objects are a mix of bytes- and text-handling
    objects (for instance, BytesIO and StringIO).
    """

    def __init__(self, *fileobjs):
        if not all([callable(getattr(f, 'read', None)) and
                    callable(getattr(f, 'seek', None)) for f in fileobjs]):
            raise TypeError('MultiFileReader expected file-like objects'
                            ' with .read() and .seek()')
        if all([is_text_fileobj(f) for f in fileobjs]):
            # codecs.open and io.TextIOBase
            self._joiner = u''
        elif any([is_text_fileobj(f) for f in fileobjs]):
            raise ValueError('All arguments to MultiFileReader must handle'
                             ' bytes OR text, not a mix')
        else:
            # open/file and io.BytesIO
            self._joiner = b''
        self._fileobjs = fileobjs
        self._index = 0

    def read(self, amt=None):
        """Read up to the specified *amt*, seamlessly bridging across
        files. Returns the appropriate type of string (bytes or text)
        for the input, and returns an empty string when the files are
        exhausted.
        """
        if not amt:
            return self._joiner.join(f.read() for f in self._fileobjs)
        parts = []
        while amt > 0 and self._index < len(self._fileobjs):
            parts.append(self._fileobjs[self._index].read(amt))
            got = len(parts[-1])
            if got < amt:
                self._index += 1
            amt -= got
        return self._joiner.join(parts)

    def seek(self, offset, whence=os.SEEK_SET):
        """Enables setting position of the file cursor to a given
        *offset*. Currently only supports ``offset=0``.
        """
        if whence != os.SEEK_SET:
            raise NotImplementedError(
                'MultiFileReader.seek() only supports os.SEEK_SET')
        if offset != 0:
            raise NotImplementedError(
                'MultiFileReader only supports seeking to start at this time')
        for f in self._fileobjs:
            f.seek(0)