merge

.gitignore

@@ -13,6 +13,7 @@ tmp/
 .vs/
 .vscode/
 *.idea
+.idea/
 **/build/**/*.vcproj.*.user
 **/build/**/*.vcxproj.*.user
 **/build/**/*.vcproj.user

miniconda3/LICENSE.txt

@@ -1,87 +0,0 @@
-======================================
-End User License Agreement - Miniconda
-======================================
-
-Copyright 2015-2023, Anaconda, Inc.
-
-All rights reserved under the 3-clause BSD License:
-
-This End User License Agreement (the "Agreement") is a legal agreement between you and Anaconda, Inc. ("Anaconda") and governs your use of Miniconda.
-
-Subject to the terms of this Agreement, Anaconda hereby grants you a non-exclusive, non-transferable license to:
-
-  * Install and use the Miniconda,
-  * Modify and create derivative works of sample source code delivered in Miniconda subject to the Terms of Service for the Repository (as defined hereinafter) available at https://www.anaconda.com/terms-of-service, and
-  * Redistribute code files in source (if provided to you by Anaconda as source) and binary forms, with or without modification subject to the requirements set forth below.
-
-Anaconda may, at its option, make available patches, workarounds or other updates to Miniconda. Unless the updates are provided with their separate governing terms, they are deemed part of Miniconda licensed to you as provided in this Agreement. This Agreement does not entitle you to any support for Miniconda.
-
-Anaconda reserves all rights not expressly granted to you in this Agreement.
-
-Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
-
-  * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
-  * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
-  * Neither the name of Anaconda nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
-
-You acknowledge that, as between you and Anaconda, Anaconda owns all right, title, and interest, including all intellectual property rights, in and to Miniconda and, with respect to third-party products distributed with or through Miniconda, the applicable third-party licensors own all right, title and interest, including all intellectual property rights, in and to such products. If you send or transmit any communications or materials to Anaconda suggesting or recommending changes to the software or documentation, including without limitation, new features or functionality relating thereto, or any comments, questions, suggestions or the like ("Feedback"), Anaconda is free to use such Feedback. You hereby assign to Anaconda all right, title, and interest in, and Anaconda is free to use, without any attribution or compensation to any party, any ideas, know-how, concepts, techniques or other intellectual property rights contained in the Feedback, for any purpose whatsoever, although Anaconda is not required to use any Feedback.
-
-DISCLAIMER
-==========
-
-THIS SOFTWARE IS PROVIDED BY ANACONDA AND ITS CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANACONDA BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-TO THE MAXIMUM EXTENT PERMITTED BY LAW, ANACONDA AND ITS AFFILIATES SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, OR ANY LOST PROFITS, LOSS OF USE, LOSS OF DATA OR LOSS OF GOODWILL, OR THE COSTS OF PROCURING SUBSTITUTE PRODUCTS, ARISING OUT OF OR IN CONNECTION WITH THIS AGREEMENT OR THE USE OR PERFORMANCE OF MINICONDA, WHETHER SUCH LIABILITY ARISES FROM ANY CLAIM BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR ANY OTHER CAUSE OF ACTION OR THEORY OF LIABILITY. IN NO EVENT WILL THE TOTAL CUMULATIVE LIABILITY OF ANACONDA AND ITS AFFILIATES UNDER OR ARISING OUT OF THIS AGREEMENT EXCEED 10.00 U.S. DOLLARS.
-
-Miscellaneous
-=============
-
-If you want to terminate this Agreement, you may do so by discontinuing use of Miniconda. Anaconda may, at any time, terminate this Agreement and the license granted hereunder if you fail to comply with any term of this Agreement. Upon any termination of this Agreement, you agree to promptly discontinue use of the Miniconda and destroy all copies in your possession or control. Upon any termination of this Agreement all provisions survive except for the licenses granted to you.
-
-This Agreement is governed by and construed in accordance with the internal laws of the State of Texas without giving effect to any choice or conflict of law provision or rule that would require or permit the application of the laws of any jurisdiction other than those of the State of Texas. Any legal suit, action, or proceeding arising out of or related to this Agreement or the licenses granted hereunder by you must be instituted exclusively in the federal courts of the United States or the courts of the State of Texas in each case located in Travis County, Texas, and you irrevocably submit to the jurisdiction of such courts in any such suit, action, or proceeding.
-
-Notice of Third Party Software Licenses
-=======================================
-
-Miniconda provides access to a repository (the "Repository") which contains software packages or tools licensed on an open source basis from third parties and binary packages of these third party tools. These third party software packages or tools are provided on an "as is" basis and are subject to their respective license agreements as well as this Agreement and the Terms of Service for the Repository located at https://www.anaconda.com/terms-of-service; provided, however, no restriction contained in the Terms of Service shall be construed so as to limit Your ability to download the packages contained in Miniconda provided you comply with the license for each such package. These licenses may be accessed from within the Miniconda software[1] or https://www.anaconda.com/legal. Information regarding which license is applicable is available from within many of the third party software packages and tools and at https://repo.anaconda.com/pkgs/main/ and https://repo.anaconda.com/pkgs/r/. Anaconda reserves the right, in its sole discretion, to change which third party tools are included in the Repository accessible through Miniconda.
-
-
-Intel Math Kernel Library
--------------------------
-
-Miniconda provides access to re-distributable, run-time, shared-library files from the Intel Math Kernel Library ("MKL binaries").
-
-Copyright 2018 Intel Corporation. License available at https://software.intel.com/en-us/license/intel-simplified-software-license (the "MKL License").
-
-You may use and redistribute the MKL binaries, without modification, provided the following conditions are met:
-
-  * Redistributions must reproduce the above copyright notice and the following terms of use in the MKL binaries and in the documentation and/or other materials provided with the distribution.
-  * Neither the name of Intel nor the names of its suppliers may be used to endorse or promote products derived from the MKL binaries without specific prior written permission.
-  * No reverse engineering, decompilation, or disassembly of the MKL binaries is permitted.
-
-You are specifically authorized to use and redistribute the MKL binaries with your installation of Miniconda subject to the terms set forth in the MKL License. You are also authorized to redistribute the MKL binaries with Miniconda or in the Anaconda package that contains the MKL binaries. If needed, instructions for removing the MKL binaries after installation of Miniconda are available at https://docs.anaconda.com.
-
-cuDNN Software
---------------
-
-Miniconda also provides access to cuDNN software binaries ("cuDNN binaries") from NVIDIA Corporation. You are specifically authorized to use the cuDNN binaries with your installation of Miniconda subject to your compliance with the license agreement located at https://docs.nvidia.com/deeplearning/sdk/cudnn-sla/index.html. You are also authorized to redistribute the cuDNN binaries with an Miniconda package that contains the cuDNN binaries. You can add or remove the cuDNN binaries utilizing the install and uninstall features in Miniconda.
-
-cuDNN binaries contain source code provided by NVIDIA Corporation.
-
-Arm Performance Libraries
--------------------------
-
-Arm Performance Libraries (Free Version): Anaconda provides access to software and related documentation from the Arm Performance Libraries ("Arm PL") provided by Arm Limited. By installing or otherwise accessing the Arm PL, you acknowledge and agree that use and distribution of the Arm PL is subject to your compliance with the Arm PL end user license agreement located at: https://developer.arm.com/tools-and-software/server-and-hpc/downloads/arm-performance-libraries/eula.
-
-Export; Cryptography Notice
-===========================
-
-You must comply with all domestic and international export laws and regulations that apply to the software, which include restrictions on destinations, end users, and end use. Miniconda includes cryptographic software. The country in which you currently reside may have restrictions on the import, possession, use, and/or re-export to another country, of encryption software. BEFORE using any encryption software, please check your country's laws, regulations and policies concerning the import, possession, or use, and re-export of encryption software, to see if this is permitted. See the Wassenaar Arrangement http://www.wassenaar.org/ for more information.
-
-Anaconda has self-classified this software as Export Commodity Control Number (ECCN) EAR99, which includes mass market information security software using or performing cryptographic functions with asymmetric algorithms. No license is required for export of this software to non-embargoed countries.
-
-The Intel Math Kernel Library contained in Miniconda is classified by Intel as ECCN 5D992.c with no license required for export to non-embargoed countries.
-
-The following packages listed on https://www.anaconda.com/cryptography are included in the Repository accessible through Miniconda that relate to cryptography.
-
-Last updated March 21, 2022

miniconda3/lib/icu/current

@@ -1 +0,0 @@
-58.2

miniconda3/lib/terminfo

@@ -1 +0,0 @@
-../share/terminfo

miniconda3/pkgs/.constructor-build.info

@@ -1 +0,0 @@
-{"constructor": "3.4.3", "conda": "22.11.1", "platform": "linux", "python": "3.10.10 (main, Mar 21 2023, 18:45:11) [GCC 11.2.0]", "python_version": [3, 10, 10, "final", 0], "machine": "x86_64", "platform_full": "#48-Ubuntu SMP Tue Jun 20 20:34:08 UTC 2023", "extra": ["debian", "11", "bullseye"]}

miniconda3/pkgs/_libgcc_mutex-0.1-main/info/about.json

@@ -1,98 +0,0 @@
-{
-  "channels": [
-    "defaults"
-  ],
-  "conda_build_version": "3.18.5",
-  "conda_private": false,
-  "conda_version": "4.7.5",
-  "env_vars": {
-    "CIO_TEST": "<not set>"
-  },
-  "extra": {
-    "copy_test_source_files": true,
-    "final": true
-  },
-  "identifiers": [],
-  "keywords": [],
-  "root_pkgs": [
-    "anaconda-client 1.7.2 py37_0",
-    "asn1crypto 0.24.0 py37_0",
-    "attrs 19.1.0 py37_1",
-    "beautifulsoup4 4.7.1 py37_1",
-    "binutils_impl_linux-64 2.31.1 h6176602_1",
-    "binutils_linux-64 2.31.1 h6176602_7",
-    "bzip2 1.0.6 h14c3975_5",
-    "ca-certificates 2019.5.15 0",
-    "cffi 1.12.3 py37h2e261b9_0",
-    "chardet 3.0.4 py37_1",
-    "clyent 1.2.2 py37_1",
-    "cryptography 2.7 py37h1ba5d50_0",
-    "curl 7.64.1 hbc83047_0",
-    "decorator 4.4.0 py37_1",
-    "expat 2.2.6 he6710b0_0",
-    "gcc_impl_linux-64 7.3.0 habb00fd_1",
-    "gcc_linux-64 7.3.0 h553295d_7",
-    "git 2.20.1 pl526hacde149_0",
-    "glob2 0.6 py37_1",
-    "gxx_impl_linux-64 7.3.0 hdf63c60_1",
-    "gxx_linux-64 7.3.0 h553295d_7",
-    "idna 2.8 py37_0",
-    "ipython_genutils 0.2.0 py37_0",
-    "jinja2 2.10.1 py37_0",
-    "jsonschema 3.0.1 py37_0",
-    "jupyter_core 4.4.0 py37_0",
-    "krb5 1.16.1 h173b8e3_7",
-    "libarchive 3.3.3 h5d8350f_5",
-    "libcurl 7.64.1 h20c2e04_0",
-    "libedit 3.1.20181209 hc058e9b_0",
-    "libffi 3.2.1 hd88cf55_4",
-    "liblief 0.9.0 h7725739_2",
-    "libssh2 1.8.2 h1ba5d50_0",
-    "lz4-c 1.8.1.2 h14c3975_0",
-    "lzo 2.10 h49e0be7_2",
-    "markupsafe 1.1.1 py37h7b6447c_0",
-    "nbformat 4.4.0 py37_0",
-    "ncurses 6.1 he6710b0_1",
-    "openssl 1.1.1c h7b6447c_1",
-    "patchelf 0.9 he6710b0_3",
-    "perl 5.26.2 h14c3975_0",
-    "pkginfo 1.5.0.1 py37_0",
-    "psutil 5.6.2 py37h7b6447c_0",
-    "py-lief 0.9.0 py37h7725739_2",
-    "pycosat 0.6.3 py37h14c3975_0",
-    "pycparser 2.19 py37_0",
-    "pyopenssl 19.0.0 py37_0",
-    "pyrsistent 0.14.11 py37h7b6447c_0",
-    "pysocks 1.7.0 py37_0",
-    "python 3.7.3 h0371630_0",
-    "python-dateutil 2.8.0 py37_0",
-    "python-libarchive-c 2.8 py37_6",
-    "pytz 2019.1 py_0",
-    "pyyaml 5.1 py37h7b6447c_0",
-    "readline 7.0 h7b6447c_5",
-    "requests 2.22.0 py37_0",
-    "ruamel_yaml 0.15.46 py37h14c3975_0",
-    "setuptools 41.0.1 py37_0",
-    "six 1.12.0 py37_0",
-    "soupsieve 1.8 py37_0",
-    "sqlite 3.28.0 h7b6447c_0",
-    "tk 8.6.8 hbc83047_0",
-    "traitlets 4.3.2 py37_0",
-    "urllib3 1.24.2 py37_0",
-    "xz 5.2.4 h14c3975_4",
-    "yaml 0.1.7 had09818_2",
-    "zlib 1.2.11 h7b6447c_3",
-    "zstd 1.3.7 h0b5b093_0",
-    "certifi 2019.6.16 py37_0",
-    "conda-package-handling 1.3.10 py37_0",
-    "libgcc-ng 9.1.0 hdf63c60_0",
-    "libstdcxx-ng 9.1.0 hdf63c60_0",
-    "libxml2 2.9.9 hea5a465_1",
-    "filelock 3.0.12 py_0",
-    "tqdm 4.32.1 py_0",
-    "conda 4.7.5 py37_0",
-    "conda-build 3.18.5 py37_0"
-  ],
-  "summary": "Mutex for libgcc and libgcc-ng",
-  "tags": []
-}

miniconda3/pkgs/_libgcc_mutex-0.1-main/info/hash_input.json

@@ -1,3 +0,0 @@
-{
-  "libgcc_mutex_build_string": "main"
-}

miniconda3/pkgs/_libgcc_mutex-0.1-main/info/index.json

@@ -1,11 +0,0 @@
-{
-  "arch": "x86_64",
-  "build": "main",
-  "build_number": 0,
-  "depends": [],
-  "name": "_libgcc_mutex",
-  "platform": "linux",
-  "subdir": "linux-64",
-  "timestamp": 1562011674792,
-  "version": "0.1"
-}

miniconda3/pkgs/_libgcc_mutex-0.1-main/info/paths.json

@@ -1,4 +0,0 @@
-{
-  "paths": [],
-  "paths_version": 1
-}

miniconda3/pkgs/_libgcc_mutex-0.1-main/info/recipe/conda_build_config.yaml

@@ -1,114 +0,0 @@
-CONDA_BUILD_SYSROOT: /opt/MacOSX10.10.sdk
-MACOSX_DEPLOYMENT_TARGET: '10.9'
-VERBOSE_AT: V=1
-VERBOSE_CM: VERBOSE=1
-apr: 1.6.3
-blas_impl: mkl
-boost: '1.67'
-bzip2: '1.0'
-c_compiler: gcc
-c_compiler_version: 7.3.0
-cairo: '1.14'
-clang_variant: clang
-cpu_optimization_target: nocona
-cran_mirror: https://mran.microsoft.com/snapshot/2018-01-01
-ctng_binutils: 2.31.1
-ctng_duma: 2.5.15
-ctng_gcc: 7.3.0
-ctng_gcc_activation_build_num: '7'
-ctng_gcc_build_number: '2'
-ctng_gmp: 6.1.2
-ctng_isl: '0.19'
-ctng_kernel: 2.6.32
-ctng_libc: gnu
-ctng_libiconv: '1.15'
-ctng_mpc: '1'
-ctng_nature: shared
-ctng_ncurses: '6.1'
-cxx_compiler: gxx
-cxx_compiler_version: 7.3.0
-cyrus_sasl: 2.1.26
-dbus: '1'
-expat: '2.2'
-extend_keys:
-- ignore_build_only_deps
-- pin_run_as_build
-- extend_keys
-- ignore_version
-fontconfig: '2.13'
-fortran_compiler: gfortran
-fortran_compiler_version: 7.3.0
-freetype: '2.9'
-g2clib: '1.6'
-geos: 3.7.1
-giflib: '5.1'
-glib: '2.56'
-gmp: '6.1'
-gnu: 2.12.2
-gst_plugins_base: '1.14'
-gstreamer: '1.14'
-harfbuzz: '1.7'
-hdf4: '4.2'
-hdf5: 1.10.4
-hdfeos2: '2.20'
-hdfeos5: '5.1'
-icu: '58'
-ignore_build_only_deps:
-- numpy
-- python
-jpeg: '9'
-libdap4: '3.19'
-libffi: '3.2'
-libgcc_mutex_build_string: main
-libgd: 2.2.5
-libgdal: '2.3'
-libgsasl: '1.8'
-libkml: '1.3'
-libnetcdf: '4.6'
-libpng: '1.6'
-libprotobuf: 3.6.0
-libtiff: '4.0'
-libwebp: 1.0.0
-libxml2: '2.9'
-libxslt: '1.1'
-llvm_variant: llvm
-lua: '5'
-lzo: '2'
-macos_machine: x86_64-apple-darwin13.4.0
-macos_min_version: '10.9'
-mkl: '2019'
-mpfr: '4'
-nodejs: '8.12'
-numpy: '1.11'
-openblas: 0.3.3
-openjpeg: '2.3'
-openssl: 1.1.1
-perl: '5.26'
-pin_run_as_build:
-  python:
-    max_pin: x.x
-    min_pin: x.x
-  r-base:
-    max_pin: x.x
-    min_pin: x.x
-  libboost:
-    max_pin: x.x.x
-pixman: '0.34'
-proj4: 5.2.0
-python: '2.7'
-qtwebkit: 'true'
-r_base: '3.5'
-r_implementation: r-base
-r_version: 3.5.0
-rust_compiler: rust
-rust_compiler_version: 1.34.1
-serf: 1.3.9
-sqlite: '3'
-target_platform: linux-64
-tk: '8.6'
-xz: '5'
-zip_keys:
-- - ctng_gcc
-  - ctng_gcc_build_number
-  - ctng_gcc_activation_build_num
-zlib: '1.2'

miniconda3/pkgs/_libgcc_mutex-0.1-main/info/recipe/meta.yaml

@@ -1,15 +0,0 @@
-# This file created by conda-build 3.18.5
-# meta.yaml template originally from:
-# /tmp/build/80754af9/rsync-recipes/_libgcc_mutex-0.1-libgcc_mutex_build_string_main-on-linux_canary, last modified Mon Jul  1 20:05:32 2019
-# ------------------------------------------------
-
-package:
-    name: _libgcc_mutex
-    version: '0.1'
-build:
-    string: main
-about:
-    summary: Mutex for libgcc and libgcc-ng
-extra:
-    copy_test_source_files: true
-    final: true

miniconda3/pkgs/_libgcc_mutex-0.1-main/info/recipe/meta.yaml.template

@@ -1,16 +0,0 @@
-{% set version = "0.1" %}
-
-
-package:
-  name: _libgcc_mutex
-  version: {{ version }}
-
-build:
-  string: {{ libgcc_mutex_build_string }}
-  {% if libgcc_mutex_build_string == "free" %}
-  track_features:
-    - free_channel_libgcc
-  {% endif %}
-
-about:
-  summary: Mutex for libgcc and libgcc-ng

miniconda3/pkgs/_libgcc_mutex-0.1-main/info/recipe/recipe_log.txt

@@ -1,17 +0,0 @@
-commit f38132b068f88c0ae92de76a03fd75d552e6d684
-Author: Mike Sarahan <msarahan@gmail.com>
-Date:   Mon Jul 1 15:04:48 2019 -0500
-
-    make track_feature a little less commonly named
-
-commit e51b85dc605184d9866504a65ef7b2397f6008ff
-Author: Sophia Castellarin <scastellarin@anaconda.com>
-Date:   Mon Jul 1 14:44:25 2019 -0500
-
-    Loop over packages from conda_build_config.yaml
-
-commit 2691f018a46454f27024aabae0f6f028d3e01695
-Author: Sophia Castellarin <scastellarin@anaconda.com>
-Date:   Mon Jul 1 14:18:35 2019 -0500
-
-    Create mutex packages for main and free

miniconda3/pkgs/_libgcc_mutex-0.1-main/info/repodata_record.json

@@ -1,20 +0,0 @@
-{
-  "build": "main",
-  "build_number": 0,
-  "channel": "https://repo.anaconda.com/pkgs/main/linux-64",
-  "constrains": [],
-  "depends": [],
-  "features": "",
-  "fn": "_libgcc_mutex-0.1-main.conda",
-  "legacy_bz2_md5": "013d3f22cd3b87f71224bd936765bcad",
-  "legacy_bz2_size": 3121,
-  "md5": "c3473ff8bdb3d124ed5ff11ec380d6f9",
-  "name": "_libgcc_mutex",
-  "sha256": "476626712f60e5ef0fe04c354727152b1ee5285d57ccd3575c7be930122bd051",
-  "size": 3473,
-  "subdir": "linux-64",
-  "timestamp": 1562011674792,
-  "track_features": "",
-  "url": "https://repo.anaconda.com/pkgs/main/linux-64/_libgcc_mutex-0.1-main.conda",
-  "version": "0.1"
-}

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/about.json

@@ -1,96 +0,0 @@
-{
-  "channels": [
-    "https://repo.anaconda.com/pkgs/main"
-  ],
-  "conda_build_version": "3.21.8",
-  "conda_private": false,
-  "conda_version": "4.11.0",
-  "env_vars": {
-    "CIO_TEST": "<not set>"
-  },
-  "extra": {
-    "copy_test_source_files": true,
-    "final": true,
-    "flow_run_id": "2f66d621-ebda-4fb5-92c1-4e86fe27c916",
-    "parent_recipe": {
-      "name": "gcc-compiler",
-      "path": "/feedstock/recipe",
-      "version": "11.2.0"
-    },
-    "recipe-maintainers": [
-      "katietz"
-    ],
-    "remote_url": "git@github.com:AnacondaRecipes/gcc_toolchain-feedstock.git",
-    "sha": "4c0a4d997795b643346dd071598ce13578be7b1e"
-  },
-  "home": "https://github.com/AnacondaRecipes/gcc-compiler-feedstock",
-  "identifiers": [],
-  "keywords": [],
-  "license": "BSD-3-Clause",
-  "license_file": "../LICENSE",
-  "root_pkgs": [
-    "_libgcc_mutex 0.1 main",
-    "_openmp_mutex 4.5 1_gnu",
-    "brotlipy 0.7.0 py39h27cfd23_1003",
-    "chardet 4.0.0 py39h06a4308_1003",
-    "conda-package-handling 1.7.3 py39h27cfd23_1",
-    "ld_impl_linux-64 2.35.1 h7274673_9",
-    "libffi 3.3 he6710b0_2",
-    "libgcc-ng 9.3.0 h5101ec6_17",
-    "libgomp 9.3.0 h5101ec6_17",
-    "libstdcxx-ng 9.3.0 hd4cf53a_17",
-    "pycosat 0.6.3 py39h27cfd23_0",
-    "pysocks 1.7.1 py39h06a4308_0",
-    "ruamel_yaml 0.15.100 py39h27cfd23_0",
-    "xz 5.2.5 h7b6447c_0",
-    "yaml 0.2.5 h7b6447c_0",
-    "beautifulsoup4 4.10.0 pyh06a4308_0",
-    "bzip2 1.0.8 h7b6447c_0",
-    "ca-certificates 2022.2.1 h06a4308_0",
-    "certifi 2021.10.8 py39h06a4308_2",
-    "cffi 1.15.0 py39hd667e15_1",
-    "charset-normalizer 2.0.4 pyhd3eb1b0_0",
-    "conda 4.11.0 py39h06a4308_0",
-    "conda-build 3.21.8 py39h06a4308_1",
-    "cryptography 36.0.0 py39h9ce1e76_0",
-    "filelock 3.6.0 pyhd3eb1b0_0",
-    "glob2 0.7 pyhd3eb1b0_0",
-    "icu 58.2 he6710b0_3",
-    "idna 3.3 pyhd3eb1b0_0",
-    "jinja2 2.11.3 pyhd3eb1b0_0",
-    "libarchive 3.4.2 h62408e4_0",
-    "liblief 0.10.1 h2531618_1",
-    "libxml2 2.9.12 h03d6c58_0",
-    "lz4-c 1.9.3 h295c915_1",
-    "markupsafe 2.0.1 py39h27cfd23_0",
-    "ncurses 6.3 h7f8727e_2",
-    "openssl 1.1.1m h7f8727e_0",
-    "patchelf 0.13 h295c915_0",
-    "pip 21.2.4 py39h06a4308_0",
-    "pkginfo 1.8.2 pyhd3eb1b0_0",
-    "psutil 5.8.0 py39h27cfd23_1",
-    "py-lief 0.10.1 py39h2531618_1",
-    "pycparser 2.21 pyhd3eb1b0_0",
-    "pyopenssl 22.0.0 pyhd3eb1b0_0",
-    "python 3.9.7 h12debd9_1",
-    "python-libarchive-c 2.9 pyhd3eb1b0_1",
-    "pytz 2021.3 pyhd3eb1b0_0",
-    "pyyaml 6.0 py39h7f8727e_1",
-    "readline 8.1.2 h7f8727e_1",
-    "requests 2.27.1 pyhd3eb1b0_0",
-    "ripgrep 12.1.1 0",
-    "setuptools 58.0.4 py39h06a4308_0",
-    "six 1.16.0 pyhd3eb1b0_1",
-    "soupsieve 2.3.1 pyhd3eb1b0_0",
-    "sqlite 3.38.0 hc218d9a_0",
-    "tk 8.6.11 h1ccaba5_0",
-    "tqdm 4.62.3 pyhd3eb1b0_1",
-    "tzdata 2021e hda174b7_0",
-    "urllib3 1.26.8 pyhd3eb1b0_0",
-    "wheel 0.37.1 pyhd3eb1b0_0",
-    "zlib 1.2.11 h7f8727e_4",
-    "zstd 1.4.9 haebb681_0"
-  ],
-  "summary": "OpenMP Implementation Mutex",
-  "tags": []
-}

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/files

@@ -1 +0,0 @@
-lib/libgomp.so.1

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/hash_input.json

@@ -1,7 +0,0 @@
-{
-  "channel_targets": "defaults",
-  "libgomp_ver": "1.0.0",
-  "openmp_ver": "5.1",
-  "target_platform": "linux-64",
-  "_libgcc_mutex": "0.1 main"
-}

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/index.json

@@ -1,18 +0,0 @@
-{
-  "arch": "x86_64",
-  "build": "1_gnu",
-  "build_number": 0,
-  "constrains": [
-    "openmp_impl 9999"
-  ],
-  "depends": [
-    "_libgcc_mutex 0.1 main",
-    "libgomp >=7.5.0"
-  ],
-  "license": "BSD-3-Clause",
-  "name": "_openmp_mutex",
-  "platform": "linux",
-  "subdir": "linux-64",
-  "timestamp": 1652859733309,
-  "version": "5.1"
-}

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/licenses/LICENSE0.txt

@@ -1,13 +0,0 @@
-BSD 3-clause license
-Copyright (c) 2022, Anaconda
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
-
-3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/paths.json

@@ -1,11 +0,0 @@
-{
-  "paths": [
-    {
-      "_path": "lib/libgomp.so.1",
-      "path_type": "softlink",
-      "sha256": "e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855",
-      "size_in_bytes": 0
-    }
-  ],
-  "paths_version": 1
-}

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/conda_build_config.yaml

@@ -1,119 +0,0 @@
-VERBOSE_AT: V=1
-VERBOSE_CM: VERBOSE=1
-_libgcc_mutex: 0.1 main
-apr: 1.6.3
-blas_impl: openblas
-boost: '1.73'
-boost_cpp: '1.73'
-bzip2: '1.0'
-c_compiler: gcc
-c_compiler_version: 7.5.0
-cairo: '1.14'
-channel_targets: defaults
-clang_variant: clang
-conda_glibc_ver: '2.17'
-cpu_arch: x86_64
-cpu_optimization_target: nocona
-cran_mirror: https://mran.microsoft.com/snapshot/2018-01-01
-cxx_compiler: gxx
-cxx_compiler_version: 7.5.0
-cyrus_sasl: 2.1.26
-dbus: '1'
-duma_version: 2.5.15
-expat: '2.2'
-extend_keys:
-- ignore_version
-- extend_keys
-- pin_run_as_build
-- ignore_build_only_deps
-fontconfig: '2.13'
-fortran_compiler: gfortran
-fortran_compiler_version: 7.5.0
-freetype: '2.10'
-g2clib: '1.6'
-gcc_version: 11.2.0
-gcc_version_build_number: '0'
-gdb_server_version: '11.2'
-gdb_version: '11.2'
-geos: 3.8.0
-giflib: '5'
-glib: '2'
-gmp: '6.1'
-gnu: '2.17'
-gst_plugins_base: '1.14'
-gstreamer: '1.14'
-harfbuzz: '2.4'
-hdf4: '4.2'
-hdf5: 1.10.6
-hdfeos2: '2.20'
-hdfeos5: '5.1'
-icu: '58'
-ignore_build_only_deps:
-- python
-- numpy
-jpeg: '9'
-kernel_version: 3.10.0
-libdap4: '3.19'
-libffi: '3.3'
-libgd: 2.2.5
-libgdal: '3.0'
-libgfortran_soname: '5'
-libgomp_ver: 1.0.0
-libgsasl: '1.8'
-libkml: '1.3'
-libnetcdf: '4.8'
-libpng: '1.6'
-libprotobuf: 3.11.2
-libtiff: '4.1'
-libwebp: 1.2.0
-libxml2: '2.9'
-libxslt: '1.1'
-llvm_variant: llvm
-ltrace_version: 0.7.3
-lua: '5'
-lzo: '2'
-mkl: '2021'
-mpfr: '4'
-numpy: '1.21'
-openblas: 0.3.3
-openjpeg: '2.3'
-openmp_ver: '5.1'
-openssl: 1.1.1
-perl: '5.26'
-pin_run_as_build:
-  python:
-    min_pin: x.x
-    max_pin: x.x
-  r-base:
-    min_pin: x.x
-    max_pin: x.x
-  libboost:
-    max_pin: x.x.x
-pixman: '0.30'
-proj: 6.2.1
-proj4: 5.2.0
-python: '3.10'
-python_impl: cpython
-python_implementation: cpython
-qtwebkit: 'true'
-r_base: '3.5'
-r_implementation: r-base
-r_version: 3.5.0
-readline: '8.0'
-rust_compiler: rust
-rust_compiler_version: 1.56.0
-serf: 1.3.9
-sqlite: '3'
-strace_version: '5.16'
-target_platform: linux-64
-tk: '8.6'
-xz: '5'
-zip_keys:
-- - gcc_version
-  - libgfortran_soname
-- - kernel_version
-  - conda_glibc_ver
-  - cpu_arch
-- - python
-  - numpy
-zlib: '1.2'

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/install_scripts/install-openmp_impl.sh

@@ -1,9 +0,0 @@
-set -e -x
-
-CHOST=$(${SRC_DIR}/build/gcc-final/gcc/xgcc -dumpmachine)
-
-mkdir -p ${PREFIX}/lib
-
-pushd ${PREFIX}/lib/
-ln -s libgomp.so.${libgomp_ver} libgomp.so.${libgomp_ver:0:1}
-popd

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/meta.yaml

@@ -1,38 +0,0 @@
-# This file created by conda-build 3.21.8
-# ------------------------------------------------
-
-package:
-  name: _openmp_mutex
-  version: 5.1
-source:
-  path: /feedstock/recipe
-build:
-  number: 0
-  run_exports:
-    strong:
-      - _openmp_mutex >=5.1
-  string: 1_gnu
-requirements:
-  build: []
-  run:
-    - _libgcc_mutex 0.1 main
-    - libgomp >=7.5.0
-  run_constrained:
-    - openmp_impl 9999
-test:
-  commands:
-    - test -f ${PREFIX}/lib/libgomp.so.1
-    - test `readlink ${PREFIX}/lib/libgomp.so.1` == "libgomp.so.1.0.0"
-about:
-  home: https://github.com/AnacondaRecipes/gcc-compiler-feedstock
-  license: BSD-3-Clause
-  license_file: ../LICENSE
-  summary: OpenMP Implementation Mutex
-extra:
-  copy_test_source_files: true
-  final: true
-  flow_run_id: 2f66d621-ebda-4fb5-92c1-4e86fe27c916
-  recipe-maintainers:
-    - katietz
-  remote_url: git@github.com:AnacondaRecipes/gcc_toolchain-feedstock.git
-  sha: 4c0a4d997795b643346dd071598ce13578be7b1e

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build.sh

@@ -1,34 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-# debugging ...
-if [ -z "${RECIPE_DIR}" ]; then
-    RECIPE_DIR=$PWD
-fi
-
-if [[ ${target_platform} =~ osx-.* ]]; then
-  if [[ ! -f ${BUILD_PREFIX}/bin/llvm-objcopy ]]; then
-    echo "no llvm-objcopy"
-    exit 1
-  fi
-  ln -s ${BUILD_PREFIX}/bin/llvm-objcopy ${BUILD_PREFIX}/bin/x86_64-apple-darwin19.6.0-objcopy
-  chmod +x ${BUILD_PREFIX}/bin/x86_64-apple-darwin19.6.0-objcopy
-  ln -s ${BUILD_PREFIX}/bin/llvm-objcopy ${BUILD_PREFIX}/bin/objcopy
-  chmod +x ${BUILD_PREFIX}/bin/objcopy
-  unset CC CXX
-fi
-
-if [[ $(uname) == Linux ]]; then
-  ulimit -s 32768 || true
-fi
-
-if [[ "${bootstrapping}" != "yes" ]]; then
-  # Use own compilers instead of relying on ones from the docker image/system
-  conda create -p $SRC_DIR/compilers gcc_${target_platform} gxx_${target_platform} binutils \
-                                     make gawk sed libtool --yes --quiet
-fi
-
-${RECIPE_DIR}/build_scripts/build.sh
-
-exit 0

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/binutils_host.sh

@@ -1,64 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-EXTRA_CONFIG="--enable-ld=yes --enable-gold=no"
-case "${CFG_ARCH}" in
-    arm*)
-        EXTRA_CONFIG="--enable-ld=default --enable-gold=yes --enable-threads"
-        ;;
-esac
-
-rm -rf "${WDIR}/build/binutils-host"
-mkdir "${WDIR}/build/binutils-host"
-pushd "${WDIR}/build/binutils-host"
-
-    export ac_cv_func_glob=no
-
-    CC_FOR_BUILD="${HOST}-gcc"                                 \
-    CFLAGS_FOR_BUILD="${HOST_CFLAG}"                           \
-    CXXFLAGS_FOR_BUILD="${HOST_CFLAG}"                         \
-    LDFLAGS_FOR_BUILD="${HOST_LDFLAG}"                         \
-    CFLAGS="-pipe ${HOST_CFLAG}"                               \
-    CXXFLAGS="-pipe ${HOST_CFLAG}"                             \
-    LDFLAGS="${HOST_LDFLAG}"                                   \
-    bash "${WDIR}/binutils/configure"                          \
-        --build=${HOST}                                        \
-        --host=${HOST}                                         \
-        --target=${CFG_TARGET}                                 \
-        --prefix=${WDIR}/gcc_built                             \
-        --with-sysroot=${WDIR}/gcc_built/${CFG_TARGET}/sysroot \
-        --disable-gdb --disable-multilib                       \
-        --disable-nls --disable-sim --disable-werror           \
-        --enable-deterministic-archives --enable-plugins       \
-        --with-pkgversion="Anaconda binutils"                  \
-        ${EXTRA_CONFIG}
-
-    echo "Building binutils ..."
-    make
-
-    echo "Installing binutils ..."
-    make install
-
-popd
-
-mkdir -p "${WDIR}/gcc_built/lib/bfd-plugins"
-mkdir -p "${WDIR}/buildtools/bin"
-pushd "${WDIR}/gcc_built/bin"
-    for t in "${CFG_TARGET}-"*; do
-        if [ "${t}" = "${CFG_TARGET}-*" ]; then
-            break
-        fi
-        _t="${CFG_TARGET}-${t#${CFG_TARGET}-}"
-        ln -sfv "${WDIR}/gcc_built/bin/${t}" "${WDIR}/buildtools/bin/${_t}"
-    done
-popd
-
-mkdir -p "${WDIR}/buildtools/${CFG_TARGET}"
-ln -sv "${WDIR}/gcc_built/${CFG_TARGET}/bin" "${WDIR}/buildtools/${CFG_TARGET}/bin"
-
-# clean up ...
-rm -rf "${WDIR}/build/binutils-host"
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/build.sh

@@ -1,121 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-if [ $(id -u) -eq 0 ]; then
-    echo "WARNING: You cannot run this script as root and expecting save results"
-    # exit 1
-fi
-
-n_open_files=$(ulimit -n)
-if [ "${n_open_files}" -lt 2048 ]; then
-    echo "Number of open files ${n_open_files} may not be sufficient to build the toolchain; increasing to 2048"
-    ulimit -n 2048
-fi
-
-${RECIPE_DIR}/decompress.sh
-
-mkdir -p "${WDIR}/build"
-mkdir -p "${WDIR}/buildtools/bin"
-
-echo "Preparing working directories ..."
-
-rm -rf "${WDIR}/build" "${WDIR}/buildtools" "${WDIR}/gcc_built"
-
-mkdir -p "${WDIR}/gcc_built"
-chmod -R u+w "${WDIR}/gcc_built"
-
-mkdir -p "${WDIR}/gcc_built/lib"
-ln -s "${WDIR}/gcc_built/lib" "${WDIR}/gcc_built/lib64"
-
-mkdir -p "${WDIR}/gcc_built/${CFG_TARGET}/debug-root/usr/lib"
-ln -s "${WDIR}/gcc_built/${CFG_TARGET}/debug-root/usr/lib" "${WDIR}/gcc_built/${CFG_TARGET}/debug-root/usr/lib64"
-
-mkdir -p "${WDIR}/gcc_built/${CFG_TARGET}/sysroot/usr/include"
-mkdir -p "${WDIR}/gcc_built/${CFG_TARGET}/lib"
-ln -s "${WDIR}/gcc_built/${CFG_TARGET}/lib" "${WDIR}/gcc_built/${CFG_TARGET}/lib64"
-mkdir -p "${WDIR}/gcc_built/${CFG_TARGET}/sysroot/lib"
-ln -s "${WDIR}/gcc_built/${CFG_TARGET}/sysroot/lib" "${WDIR}/gcc_built/${CFG_TARGET}/sysroot/lib64"
-mkdir -p "${WDIR}/gcc_built/${CFG_TARGET}/sysroot/usr/lib"
-ln -s "${WDIR}/gcc_built/${CFG_TARGET}/sysroot/usr/lib" "${WDIR}/gcc_built/${CFG_TARGET}/sysroot/usr/lib64"
-
-mkdir -p "${WDIR}/build"
-mkdir -p "${WDIR}/buildtools/bin"
-
-echo "Making build system tools available with poisoned name"
-for tool in ar as dlltool c++ c++filt cpp cc gcc gcc-ar gcc-nm gcc-ranlib \
-            g++ gcj gnatbind gnatmake ld libtool nm objcopy objdump ranlib \
-            strip windres; do
-    where=$(which "${ORG_HOST}-${tool}" 2>/dev/null || true)
-    [ -z "${where}" ] && where=$(which "${tool}" 2>/dev/null || true)
-
-    if [ -n "${where}" ]; then
-        printf "#!/bin/bash\nexec '${where}' \"\${@}\"\n" >"${WDIR}/buildtools/bin/${HOST}-${tool}"
-        chmod 700 "${WDIR}/buildtools/bin/${HOST}-${tool}"
-    fi
-done
-
-# for ncurses sake on powerpc and s390x we create a symlink for gcc
-pushd "${WDIR}/buildtools/bin"
-ln -s "${HOST}-gcc" gcc
-ln -s "${HOST}-g++" g++ || true
-popd
-
-printf "#!/bin/bash\n$(which makeinfo 2>/dev/null || true) --force \"\${@}\"\ntrue\n" >"${WDIR}/buildtools/bin/makeinfo"
-chmod 700 "${WDIR}/buildtools/bin/makeinfo"
-
-echo "Checking that we can run gcc --version and being able to compile program ..."
-echo "  ${HOST}-gcc --version ..."
-"${HOST}-gcc" --version || (ls compilers/bin && exit 1)
-    
-printf "int main()\n{\n  return 0;\n}\n" >"${WDIR}/build/test.c"
-"${HOST}-gcc" -pipe ${HOST_CFLAG} ${HOST_LDFLAG} "${WDIR}/build/test.c" -o "${WDIR}/build/out"
-rm -f "${WDIR}/build/test.c" "${WDIR}/build/out"
-
-echo "Starting the build ..."
-bash ${RECIPE_DIR}/build_scripts/ncurses_build.sh 
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/zlib_host.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/gmp_host.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/mpfr_host.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/isl_host.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/mpc_host.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/expat_host.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/ncurses_host.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/libiconv_host.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/gettext_host.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/binutils_host.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/kernel_headers.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/gcc_core.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/glibc_core.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/gcc_host.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/gmp_target.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/expat_target.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/ncurses_target.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/libelf_target.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/debug.sh
- [ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/final.sh
- [ $? -eq 0 ]
-
-exit 0

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/build_env.sh

@@ -1,146 +0,0 @@
-#!/bin/bash
-
-# prevent to set variables more then once
-
-if [ -z "${CFG_TARGET}" ]; then
-
-set -e
-
-nuke_dot_in_path() {
-    local new
-    local p
-    local IFS=:
-    for p in $PATH; do
-        if [ -n "${p}" -a -z "${p%%/*}" ]; then
-            new="${new}${new:+:}${p}"
-        fi
-    done
-    PATH="${new}"
-}
-
-export WDIR=$PWD
-
-CFG_GLIBC_VER="2.17.0"
-
-case "${target_platform}" in
-  *linux-64*|*osx-64*) CFG_ARCH="x86";;
-  *aarch64*|*arm64*)
-    CFG_ARCH="arm"
-    CFG_GLIBC_VER="2.26.0"
-    ;;
-  *ppc64le*) CFG_ARCH="powerpc";;
-  *s390x*) CFG_ARCH="s390";;
-  *)
-      echo "unsupported target architecture ${target_platform}"
-      exit 1
-      ;;
-esac
-
-export CFG_GLIBC_VER
-export CFG_ARCH
-
-unset ARCH_CFLAG
-unset ARCH_LDFLAG
-
-case "${CFG_ARCH}" in
-    arm*)
-        CFG_TARGET="aarch64-conda-linux-gnu"
-        ARCH_CFLAG="-mlittle-endian"
-        ARCH_LDFLAG="-Wl,-EL"
-        ;;
-    s390*)
-        CFG_TARGET="s390x-conda-linux-gnu"
-        ;;
-    powerpc*)
-        CFG_TARGET="powerpc64le-conda-linux-gnu"
-        ARCH_CFLAG="-mlittle-endian"
-        ARCH_LDFLAG="-Wl,-EL"
-        ;;
-    x86*)
-        CFG_TARGET="x86_64-conda-linux-gnu"
-        ;;
-esac
-
-if [[ "${bootstrapping}" != "yes" ]]; then
-  export PATH=$WDIR/compilers/bin:$PATH
-  if [ "${CFG_ARCH}" = "powerpc" ]; then
-    HOST="powerpc64le-conda_cos7-linux-gnu"
-  else
-    HOST="${CFG_TARGET}"
-  fi
-fi
-
-# we can't use conda's HOST compiler ...
-# so we pick system-compiler instead
-if [ -z "${HOST}" ]; then
-   HOST=$(gcc -dumpmachine)
-fi
-
-export CFG_TARGET
-export ARCH_CFLAG
-export ARCH_LDFLAG
-
-export LC_ALL=C
-export LANG=C
-
-# make sure path does not contain current dir '.'
-nuke_dot_in_path
-
-unset GREP_OPTIONS
-export CONFIG_SITE=
-
-mkdir -p "${WDIR}/build"
-mkdir -p "${WDIR}/buildtools/bin"
-
-unset MAKEFLAGS
-export SHELL="/bin/bash"
-
-echo "Preparing working directories ..."
-
-export ORG_HOST="${HOST}"
-
-# poison name for enforcing cross-build
-export HOST="${HOST/-/-build_}"
-
-export PATH="${WDIR}/gcc_built/bin:${WDIR}/buildtools/bin:${PATH}"
-
-CLANG_CFLAGS=
-OSX_CFLAGS=
-OSX_LDFLAGS=
-if ${HOST}-gcc --version 2>&1 | grep clang; then
-    CLANG_CFLAGS=" -Qunused-arguments"
-fi
-case "${HOST}" in
-    *darwin*)
-        OSX_CLFAGS=" -fno-common"
-        OSX_LDFLAGS=" -framework CoreFoundation"
-        ;;
-esac
-
-export HOST_CFLAG="-O2 -g -I${WDIR}/buildtools/include ${CLANG_CFLAGS} ${OSX_CFLAGS}"
-export HOST_LDFLAG="-L${WDIR}/buildtools/lib ${OSX_LDFLAGS}"
-
-# the prefix flags ..
-export TARGET_LDFLAG="-Wl,-rpath,${WDIR}/gcc_built/lib -Wl,-rpath-link,${WDIR}/gcc_built/lib -L${WDIR}/gcc_built/lib"
-
-for d in CFLAGS LDFLAGS CPPFLAGS CXXFLAGS; do
-    eval export ${d}=
-    eval export DEBUG_${d}=
-    eval export ${d}_USED=
-    eval export DEBUG_${d}_USED=
-done
-
-
-for d in ADDR2LINE AR AS CC CPP CXX CXXFILT ELFEDIT GCC GCC_AR GCC_NM GCC_RANLIB \
-         GPROF GXX LD LD_GOLD NM RANLIB READELF SIZE STRINGS STRIP \
-         CMAKE_PREFIX_PATH CMAKE_ARGS OBJCOPY OBJDUMP \
-         host_alias build_aliasa \
-         CC_FOR_BUILD CXX_FOR_BUILD LD_FOR_BUILD CPP_FOR_BUILD; do
-    eval export ${d}=
-    eval unset ${d}
-done
-
-export BUILD=
-export HOST=$HOST
-
-fi

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/debug.sh

@@ -1,18 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-bash ${RECIPE_DIR}/build_scripts/duma_target.sh
-[ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/ltrace_target.sh
-[ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/strace_target.sh
-[ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/gdb_server.sh
-[ $? -eq 0 ]
-bash ${RECIPE_DIR}/build_scripts/gdb_target.sh
-[ $? -eq 0 ]
-
-exit 0

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/duma_target.sh

@@ -1,33 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/duma-target"
-mkdir -p "${WDIR}/build/duma-target"
-pushd "${WDIR}/build/duma-target"
-    cp -r "${WDIR}"/duma/* .
-
-    echo "Building duma ..."
-    make DUMA_CPP=1 DUMASO= OS="linux"                          \
-        CC="${CFG_TARGET}-gcc ${ARCH_CFLAG}"                    \
-        CXX="${CFG_TARGET}-g++ ${ARCH_CFLAG}"                   \
-        HOSTCC="${HOST}-gcc"                                    \
-        RANLIB="${CFG_TARGET}-ranlib"                           \
-        LDFLAGS="${TARGET_LDFLAG}"                              \
-        prefix="${WDIR}/gcc_built/${CFG_TARGET}/debug-root/usr" \
-        all
-
-    echo "Installing duma ..."
-    make DUMA_CPP=1 DUMASO= OS="linux"                          \
-        CC="${CFG_TARGET}-gcc ${ARCH_CFLAG}"                    \
-        CXX="${CFG_TARGET}-g++ ${ARCH_CFLAG}"                   \
-        HOSTCC="${HOST}-gcc"                                    \
-        RANLIB="${CFG_TARGET}-ranlib"                           \
-        LDFLAGS="${TARGET_LDFLAG}"                              \
-        prefix="${WDIR}/gcc_built/${CFG_TARGET}/debug-root/usr" \
-        install
-
-popd
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/expat_host.sh

@@ -1,31 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/expat-host"
-mkdir "${WDIR}/build/expat-host"
-pushd "${WDIR}/build/expat-host"
-
-    CFLAGS="-pipe ${HOST_CFLAG}"      \
-    LDFLAGS="${HOST_LDFLAG}"          \
-    bash "${WDIR}/expat/configure"    \
-        --build=${HOST}               \
-        --host=${HOST}                \
-        --prefix="${WDIR}/buildtools" \
-        --enable-static               \
-        --disable-shared              \
-        --without-docbook
-
-    echo "Building expat ..."
-    make
-
-    echo "Installing expat ..."
-    make install
-
-popd
-
-# clean up ...
-rm -rf "${WDIR}/build/expat-host"
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/expat_target.sh

@@ -1,31 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/expat-target"
-mkdir "${WDIR}/build/expat-target"
-pushd "${WDIR}/build/expat-target"
-
-    CFLAGS="${ARCH_CFLAG}"                    \
-    LDFLAGS="${TARGET_LDFLAG} ${ARCH_LDFLAG}" \
-    bash "${WDIR}/expat/configure"            \
-        --build=${HOST}                       \
-        --host=${CFG_TARGET}                  \
-        --prefix="/usr"                       \
-        --enable-static                       \
-        --enable-shared                       \
-        --without-docbook
-
-    echo "Building expat ..."
-    make
-
-    echo "Installing expat ..."
-    make install DESTDIR="${WDIR}/gcc_built/${CFG_TARGET}/sysroot"
-
-popd
-
-# clean up ...
-rm -rf "${WDIR}/build/expat-target"
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/final.sh

@@ -1,50 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-echo "Finalizing the toolchain's directories ..."
-
-STRIP_ARG="--strip-unneeded -v"
-case "$HOST" in
-    *darwin*)
-       STRIP_ARG=""
-       ;;
-esac
-
-echo "Stripping all executables in prefix ..."
-pushd "${WDIR}/gcc_built"
-
-    if [ -f "${CFG_TARGET}/debug-root/usr/bin/gdbserver" ]; then
-        "${CFG_TARGET}-strip" ${STRIP_ARG} "${CFG_TARGET}/debug-root/usr/bin/gdbserver"
-    fi
-    gcc_version=$(cat "${WDIR}/gcc/gcc/BASE-VER")
-    for _t in "bin/${CFG_TARGET}-"*                                      \
-              "${CFG_TARGET}/bin/"*                                      \
-              "libexec/gcc/${CFG_TARGET}/${gcc_version}/"*               \
-              "libexec/gcc/${CFG_TARGET}/${gcc_version}/install-tools/"* \
-        ; do
-            _type="$( file "${_t}" |cut -d ' ' -f 2- )"
-        case "${_type}" in
-            *script*executable*)
-                ;;
-            *executable*|*shared*object*)
-                ${HOST}-strip ${STRIP_ARG} "${_t}"
-                ;;
-        esac
-    done
-popd
-
-rm -rf  "${WDIR}/gcc_built/"{,usr/}{,share/}{man,info}
-rm -rf  "${WDIR}/gcc_built/${CFG_TARGET}/sysroot/"{,usr/}{,share/}{man,info}
-rm -rf  "${WDIR}/gcc_built/${CFG_TARGET}/debug-root/"{,usr/}{,share/}{man,info}
-
-for licfile in $( find "${WDIR}" -follow -type f -a \( -name "COPYING*" -o -name "LICENSE*" \) ); do
-    dstdir="${licfile%/*}"
-    dstdir="${WDIR}/gcc_built/share/licenses${dstdir#${WDIR}}"
-    mkdir -p "${dstdir}"
-    cp -av "${licfile}" "${dstdir}/"
-done
-
-shopt -u nullglob

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/gcc_core.sh

@@ -1,99 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/gcc-core"
-mkdir -p "${WDIR}/build/gcc-core"
-pushd "${WDIR}/build/gcc-core"
-
-    glibc_version=`echo "${CFG_GLIBC_VER}" | sed 's/\([1-9][0-9]*\.[1-9][0-9]*\).*/\1/'`
-
-    CLANG_CFLAG=
-    if ${HOST}-gcc --version 2>&1 | grep clang; then
-      CLANG_CFLAG="-fbracket-depth=512"
-    fi
-
-    CC_FOR_BUILD="${HOST}-gcc"                                        \
-    CFLAGS="${HOST_CFLAG} ${CLANG_CFLAG}"                             \
-    CFLAGS_FOR_BUILD="${HOST_CFLAG} ${CLANG_CFLAG}"                   \
-    CXXFLAGS="${HOST_CFLAG} ${CLANG_CFLAG}"                           \
-    CXXFLAGS_FOR_BUILD="${HOST_CFLAG} ${CLANG_CFLAG}"                 \
-    LDFLAGS="${HOST_LDFLAG} -lstdc++ -lm"                             \
-    CFLAGS_FOR_TARGET="-g -O2 ${ARCH_CFLAG}"                          \
-    CXXFLAGS_FOR_TARGET=""                                            \
-    LDFLAGS_FOR_TARGET="${TARGET_LDFLAG}"                             \
-    bash "${WDIR}/gcc/configure"                                      \
-        --build=${HOST}                                               \
-        --host=${HOST}                                                \
-        --target=${CFG_TARGET}                                        \
-        --prefix="${WDIR}/buildtools"                                 \
-        --exec_prefix="${WDIR}/buildtools"                            \
-        --with-local-prefix="${WDIR}/gcc_built/${CFG_TARGET}/sysroot" \
-        --with-sysroot="${WDIR}/gcc_built/${CFG_TARGET}/sysroot"      \
-        --enable-languages="c"                                        \
-        --disable-multilib                                            \
-        --disable-nls                                                 \
-        --with-gmp="${WDIR}/buildtools"                               \
-        --with-mpfr="${WDIR}/buildtools"                              \
-        --with-mpc="${WDIR}/buildtools"                               \
-        --with-isl="${WDIR}/buildtools"                               \
-        --without-zstd                                                \
-        --with-glibc-version=${glibc_version}                         \
-        --with-newlib                                                 \
-        --enable-threads=no                                           \
-        --disable-shared                                              \
-        --enable-__cxa_atexit                                         \
-        --disable-libgomp                                             \
-        --disable-libmudflap                                          \
-        --disable-libmpx                                              \
-        --enable-libquadmath                                          \
-        --enable-libquadmath-support                                  \
-        --disable-libstdcxx-verbose                                   \
-        --disable-libstdcxx                                           \
-        --with-pkgversion="Anaconda bootstrap gcc"                    \
-        --enable-lto
-
-        make configure-gcc configure-libcpp configure-build-libiberty
-        make all-libcpp all-build-libiberty
-        if [ -d "${WDIR}/gcc/libdecnumber" ]; then
-            make configure-libdecnumber
-            make -C libdecnumber libdecnumber.a
-        fi
-        if [ -d "${WDIR}/gcc/libbacktrace" ]; then
-            make configure-libbacktrace
-            make -C libbacktrace
-        fi
-
-    make -C gcc libgcc.mvars
-    sed -r -i -e 's@-lc@@g' gcc/libgcc.mvars
-
-    echo "Building gcc core ..."
-    CFLAGS="${CFLAGS} -I${WDIR}/gcc_built/${CFG_TARGET}/sysroot/usr/include"
-    make all-gcc all-target-libgcc
-
-    echo "Installing gcc core ..."
-    make install-gcc install-target-libgcc
-
-    pushd "${WDIR}/buildtools"
-        find . -type f -name "*.la" -exec rm {} \;
-    popd
-
-    if [ -f "${WDIR}/buildtools/bin/${CFG_TARGET}-gcc" ]; then
-        ln -sfv "${CFG_TARGET}-gcc" "${WDIR}/buildtools/bin/${CFG_TARGET}-cc"
-    fi
-
-    multi_root=$( "${WDIR}/buildtools/bin/${CFG_TARGET}-gcc" -print-sysroot )
-    if [ ! -e "${multi_root}/lib" ]; then
-        ln -sfv lib "${multi_root}/lib"
-    fi
-    if [ ! -e "${multi_root}/usr/lib" ]; then
-        ln -sfv lib "${multi_root}/usr/lib"
-    fi
-
-popd
-
-# clean up ...
-rm -rf "${WDIR}/build/gcc-core"
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/gcc_host.sh

@@ -1,122 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/gcc-final"
-mkdir "${WDIR}/build/gcc-final"
-pushd "${WDIR}/build/gcc-final"
-
-    ARCH_CONFIG=
-    if [ "${CFG_ARCH}" = "x86" ]; then
-        ARCH_CONFIG="--enable-libmpx"
-    elif [ "${CFG_ARCH}" = "arm" ]; then
-        ARCH_CONFIG="--enable-gold"
-    fi
-
-    CLANG_CFLAG=
-    if ${HOST}-gcc --version 2>&1 | grep clang; then
-        CLANG_CFLAG="-fbracket-depth=512"
-    fi
-
-    CC_FOR_BUILD="${HOST}-gcc"                                        \
-    CFLAGS="${HOST_CFLAG} ${CLANG_CFLAG}"                             \
-    CFLAGS_FOR_BUILD="${HOST_CFLAG} ${CLANG_CFLAG}"                   \
-    CXXFLAGS="${HOST_CFLAG} ${CLANG_CFLAG}"                           \
-    CXXFLAGS_FOR_BUILD="${HOST_CFLAG} ${CLANG_CFLAG}"                 \
-    LDFLAGS="${HOST_LDFLAG} -lstdc++ -lm"                             \
-    CFLAGS_FOR_TARGET="-g -O2 ${ARCH_CFLAG}"                          \
-    CXXFLAGS_FOR_TARGET="${ARCH_CFLAG}"                               \
-    LDFLAGS_FOR_TARGET="${TARGET_LDFLAG} ${ARCH_LDFLAG}"              \
-    bash "${WDIR}/gcc/configure"                                      \
-        --build=${HOST}                                               \
-        --host=${HOST}                                                \
-        --target=${CFG_TARGET}                                        \
-        --prefix="${WDIR}/gcc_built"                                  \
-        --exec_prefix="${WDIR}/gcc_built"                             \
-        --with-sysroot="${WDIR}/gcc_built/${CFG_TARGET}/sysroot"      \
-        --with-local-prefix="${WDIR}/gcc_built/${CFG_TARGET}/sysroot" \
-        --enable-long-long                                            \
-        --disable-multilib                                            \
-        --disable-nls                                                 \
-        --with-gmp=${WDIR}/buildtools                                 \
-        --with-mpfr=${WDIR}/buildtools                                \
-        --with-mpc=${WDIR}/buildtools                                 \
-        --with-isl=${WDIR}/buildtools                                 \
-        --without-zstd                                                \
-        --enable-languages="c,c++,fortran,objc,obj-c++"               \
-        --enable-__cxa_atexit                                         \
-        --disable-libmudflap                                          \
-        --enable-libgomp                                              \
-        --enable-libquadmath                                          \
-        --enable-libquadmath-support                                  \
-        --enable-libsanitizer                                         \
-        --disable-libstdcxx-verbose                                   \
-        --enable-lto --enable-libcc1                                  \
-        --enable-threads=posix                                        \
-        --enable-plugin                                               \
-        --with-pkgversion="Anaconda gcc"                              \
-        "${ARCH_CONFIG}"
-
-    echo "Building final gcc compiler  ..."
-    make all
-
-    echo "Installing final gcc compiler ..."
-    make install-strip
-
-    make install-target-libobjc
-
-    pushd "${WDIR}/gcc_built"
-        find . -type f -name "*.la" -exec rm {} \;
-    popd
-
-    if [ -f "${WDIR}/gcc_built/bin/${CFG_TARGET}-gcc" ]; then
-        ln -sfv "${WDIR}/gcc_built/bin/${CFG_TARGET}-gcc" "${WDIR}/gcc_built/bin/${CFG_TARGET}-cc"
-    fi
-
-    multi_root=$( "${WDIR}/gcc_built/bin/${CFG_TARGET}-gcc" -print-sysroot )
-    if [ ! -e "${multi_root}/lib" ]; then
-        ln -sfv lib "${multi_root}/lib"
-    fi
-    if [ ! -e "${multi_root}/usr/lib" ]; then
-        ln -sfv lib "${multi_root}/usr/lib"
-    fi
-    echo $multi_root
-    if [ -d "${WDIR}/gcc_built/lib/bfd-plugins" ]; then
-        gcc_version=$(cat "${WDIR}/gcc/gcc/BASE-VER" )
-        ln -sfv "../../libexec/gcc/${CFG_TARGET}/${gcc_version}/liblto_plugin.so" "${WDIR}/gcc_built/lib/bfd-plugins/liblto_plugin.so"
-    fi
-
-popd
-
-multi_root=$( "${CFG_TARGET}-gcc" -print-sysroot )
-
-canon_root=$( cd "${multi_root}" && pwd -P )
-canon_prefix=$( cd "${WDIR}/gcc_built" && pwd -P )
-
-gcc_dir="${WDIR}/gcc_built/${CFG_TARGET}/lib"
-if [ ! -d "${gcc_dir}" ]; then
-    return
-fi
-dst_dir="${canon_root}/lib"
-rel=$( echo "${gcc_dir#${WDIR}/gcc_built/}" | sed 's#[^/]\{1,\}#..#g' )
-
-ls "${gcc_dir}" | while read f; do
-    case "${f}" in
-        *.ld)
-            continue
-            ;;
-    esac
-    if [ -f "${gcc_dir}/${f}" ]; then
-        mkdir -p "${dst_dir}"
-        mv "${gcc_dir}/${f}" "${dst_dir}/${f}"
-        ln -sf "${rel}/${dst_dir#${canon_prefix}/}/${f}" "${gcc_dir}/${f}"
-        fi
-done
-
-# require working host "gcc" tool for successful configuration of ncurses, strace, ...
-pushd "gcc_built/bin"
-ln -s ${CFG_TARGET}-gcc gcc
-popd
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/gdb_server.sh

@@ -1,61 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/gdb-server"
-mkdir -p "${WDIR}/build/gdb-server"
-pushd "${WDIR}/build/gdb-server"
-
-    export ac_cv_func_strncmp_works=yes
-
-    export CONFIG_SHELL="/bin/bash"
-    export SHELL="/bin/bash"
-
-    CC_FOR_BUILD="${HOST}-gcc"                                             \
-    CPP="${CFG_TARGET}-cpp"                                                \
-    CC="${CFG_TARGET}-gcc"                                                 \
-    CXX="${CFG_TARGET}-g++"                                                \
-    LD="${CFG_TARGET}-ld"                                                  \
-    CFLAGS="${ARCH_CFLAG}"                                                 \
-    CXXFLAGS="${ARCH_CFLAG}"                                               \
-    LDFLAGS="${TARGET_LDFLAG} ${ARCH_LDFLAG}"                              \
-    bash "${WDIR}/gdb/configure"                                           \
-        --build=${HOST}                                                    \
-        --host=${CFG_TARGET}                                               \
-        --target=${CFG_TARGET}                                             \
-        --prefix="/usr" --disable-multilib                                 \
-        --with-build-sysroot="${WDIR}/gcc_built/${CFG_TARGET}/sysroot"     \
-        --includedir="${WDIR}/gcc_built/${CFG_TARGET}/sysroot/usr/include" \
-        --without-uiout                                                    \
-        --disable-gdb                                                      \
-        --disable-gdbtk                                                    \
-        --without-x                                                        \
-        --disable-sim                                                      \
-        --without-included-gettext                                         \
-        --without-develop                                                  \
-        --sysconfdir=/etc                                                  \
-        --localstatedir=/var                                               \
-        --disable-werror                                                   \
-        --enable-64bit-bfd                                                 \
-        --enable-deterministic-archives                                    \
-        --program-prefix=                                                  \
-        --enable-gdbserver                                                 \
-        --disable-inprocess-agent                                          \
-        --disable-binutils                                                 \
-        --disable-ld                                                       \
-        --disable-gas                                                      \
-        --enable-threads                                                   \
-        --disable-nls
-
-    echo "Building gdb ..."
-    make
-
-    echo "Installing gdb ..."
-    make DESTDIR="${WDIR}/gcc_built/${CFG_TARGET}/debug-root" install
-
-    unset ac_cv_func_strncmp_works
-
-popd
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/gdb_target.sh

@@ -1,67 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/gdb-cross"
-mkdir -p "${WDIR}/build/gdb-cross"
-pushd "${WDIR}/build/gdb-cross"
-
-    export ac_cv_func_strncmp_works=yes
-
-    export CONFIG_SHELL="/bin/bash"
-    export SHELL="/bin/bash" 
-
-    CC_FOR_BUILD="${HOST}-gcc"                                             \
-    CPP="${CFG_TARGET}-cpp"                                                \
-    CC="${CFG_TARGET}-gcc"                                                 \
-    CXX="${CFG_TARGET}-g++"                                                \
-    LD="${CFG_TARGET}-ld"                                                  \
-    CFLAGS="${ARCH_CFLAG}"                                                 \
-    CXXFLAGS="${ARCH_CFLAG}"                                               \
-    LDFLAGS="${HOST_LDFLAG} ${ARCH_LDFLAG}"                                \
-    bash "${WDIR}/gdb/configure"                                           \
-        --build=${HOST}                                                    \
-        --host=${CFG_TARGET}                                               \
-        --target=${CFG_TARGET}                                             \
-        --prefix=${WDIR}/gcc_built                                         \
-        --with-sysroot=${WDIR}/gcc_built/${CFG_TARGET}/sysroot/            \
-        --with-build-sysroot="${WDIR}/gcc_built/${CFG_TARGET}/sysroot"     \
-        --includedir="${WDIR}/gcc_built/${CFG_TARGET}/sysroot/usr/include" \
-        --disable-werror                                                   \
-        --without-uiout                                                    \
-        --disable-gdbtk                                                    \
-        --without-x                                                        \
-        -disable-sim                                                       \
-        --without-included-gettext                                         \
-        --without-develop                                                  \
-        --sysconfdir=/etc                                                  \
-        --localstatedir=/var                                               \
-        --program-prefix=                                                  \
-        --disable-gdbserver                                                \
-        --with-curses                                                      \
-        --with-expat                                                       \
-        --without-libexpat-prefix                                          \
-        --enable-64bit-bfd                                                 \
-        --disable-multilib                                                 \
-        --disable-binutils                                                 \
-        --disable-ld                                                       \
-        --disable-gas                                                      \
-        --enable-threads                                                   \
-        --disable-nls                                                      \
-        --disable-inprocess-agent                                          \
-        --with-python=no
-
-    # --with-python=$PYTHON ...
-    echo "Building gdb ..."
-    make
-
-    echo "Installing gdb ..."
-
-    make DESTDIR=${WDIR}/gcc_built/${CFG_TARGET}/debug-root install
-
-    unset ac_cv_func_strncmp_works
-
-popd
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/gettext_host.sh

@@ -1,47 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-case "${HOST}" in
-    *linux*)
-        exit 0
-        ;;
-esac
-
-rm -rf "${WDIR}/build/gettext-host"
-mkdir "${WDIR}/build/gettext-host"
-pushd "${WDIR}/build/gettext-host"
-
-    CFLAGS="-pipe ${HOST_CFLAG}"                      \
-    LDFLAGS="${HOST_LDFLAG}"                          \
-    bash "${WDIR}/gettext/configure"                  \
-        --build=${HOST}                               \
-        --host="${HOST}"                              \
-        --prefix="${WDIR}/buildtools"                 \
-        --enable-static                               \
-        --disable-java                                \
-        --disable-native-java                         \
-        --disable-csharp                              \
-        --without-emacs                               \
-        --disable-openmp                              \
-        --with-included-libxml                        \
-        --with-included-gettext                       \
-        --with-included-glib                          \
-        --with-included-libcroco                      \
-        --with-included-libunistring                  \
-        --with-libncurses-prefix="${WDIR}/buildtools" \
-        --with-libiconv-prefix="${WDIR}/buildtools"   \
-        --without-libpth-prefix
-
-    echo "Building gettext ..."
-    make
-
-    echo "Installing gettext ..."
-    make install
-
-popd
-
-# save space ... clean up
-rm -rf "${WDIR}/build/gettext-host"

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/glibc_core.sh

@@ -1,117 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-get_min_kernel_config()
-{
-    version_file="${WDIR}/gcc_built/${CFG_TARGET}/sysroot/usr/include/linux/version.h"
-    if [ ! -f "${version_file}" -o ! -r "${version_file}" ]; then
-         echo "The linux version header is unavailable in installed headers"
-         exit 1
-    fi
-    v=$(grep -E LINUX_VERSION_CODE "${version_file}" | cut -d' ' -f 3)
-    v1=$(((v>>16)&0xFF))
-    v2=$(((v>>8)&0xFF))
-    v3=$((v&0xFF))
-    echo "--enable-kernel=${v1}.${v2}.${v3}"
-}
-
-rm -rf "${WDIR}/build/glibc-core"
-mkdir -p "${WDIR}/build/glibc-core"
-pushd "${WDIR}/build/glibc-core"
-
-    EXTRA_ADDONS="nptl"
-    EXTRA_CFLAGS=
-    EXTRA_CONFIG=
-    EXTRA_ASFLAG=
-    if [ "${CFG_ARCH}" = "x86" ]; then
-        EXTRA_CONFIG="--enable-obsolete-rpc"
-        EXTRA_CFLAGS="-fcommon -Wno-missing-attributes -Wno-array-bounds -Wno-array-parameter -Wno-stringop-overflow -Wno-maybe-uninitialized"
-    elif [ "${CFG_ARCH}" = "powerpc" ]; then
-        EXTRA_CFLAGS="-fcommon -Wno-missing-attributes -Wno-array-bounds -Wno-array-parameter -Wno-stringop-overflow -Wno-maybe-uninitialized"
-        EXTRA_ADDONS="ports,nptl"
-        EXTRA_ASFLAG="-DBROKEN_PPC_8xx_CPU15"
-    elif [ "${CFG_ARCH}" = "arm" ]; then
-        EXTRA_CFLAGS="-fcommon -Wno-missing-attributes -Wno-array-bounds -Wno-array-parameter -Wno-stringop-overflow -Wno-maybe-uninitialized"
-        # building glibc >=2.26
-        EXTRA_ADDONS=""
-    fi
-
-    touch config.cache
-
-    echo "libc_cv_ssp=no" >>config.cache
-    echo "libc_cv_ssp_strong=no" >>config.cache
-    echo "libc_cv_forced_unwind=yes" >>config.cache
-    echo "libc_cv_c_cleanup=yes" >>config.cache
-
-    printf "\n" > configparms
-
-    echo "ac_cv_path_BASH_SHELL=/bin/bash" >>config.cache
-
-    mkdir -p "${WDIR}/gcc_built/${CFG_TARGET}/sysroot"
-
-    pushd "${WDIR}/gcc_built/bin"
-         for t in "${CFG_TARGET}-"*; do
-              if [ "${t}" = "${CFG_TARGET}-*" ]; then
-                   break
-              fi
-              _t="${CFG_TARGET}-${t#${CFG_TARGET}-}"
-              ln -sfv "${WDIR}/gcc_built/bin/${t}" "${WDIR}/buildtools/bin/${_t}"
-         done
-    popd
-
-    export LDFLAGS="${TARGET_LDFLAG} ${ARCH_LDFLAG}"
-
-    BUILD_CC="${HOST}-gcc"                                                        \
-    CC="${CFG_TARGET}-gcc -g -O2 -U_FORTIFY_SOURCE ${ARCH_CFLAG} ${EXTRA_CFLAGS}" \
-    CPPFLAGS="-U_FORTIFY_SOURCE"                                                  \
-    CFLAGS="-U_FORTIFY_SOURCE"                                                    \
-    AR="${CFG_TARGET}-ar"                                                         \
-    RANLIB="${CFG_TARGET}-ranlib" LIBS=""                                         \
-    bash "${WDIR}/glibc/configure"                                                \
-        --prefix=/usr                                                             \
-        --build=${HOST}                                                           \
-        --host=${CFG_TARGET}                                                      \
-        --cache-file="$(pwd)/config.cache"                                        \
-        --without-cvs                                                             \
-        --disable-profile                                                         \
-        --without-gd                                                              \
-        --with-headers="${WDIR}/gcc_built/${CFG_TARGET}/sysroot/usr/include"      \
-        --with-binutils="${WDIR}/gcc_built/bin"                                   \
-        --disable-debug --disable-sanity-checks                                   \
-        $(get_min_kernel_config)                                                  \
-        --with-__thread --with-tls                                                \
-        --enable-shared                                                           \
-        --enable-add-ons="${EXTRA_ADDONS}"                                        \
-        --with-pkgversion="Anaconda glibc"                                        \
-        --disable-werror ${EXTRA_CONFIG}
-
-    OSX_CPP=
-    OSX_LD=
-    case "$HOST" in
-        *darwin*)
-            OSX_CPP="-I${WDIR}/buildtools/include/"
-            OSX_LD="-lintl -liconv"
-            ;;
-    esac
-
-    echo "Building glibc library ..."
-
-    ASFLAGS="${EXTRA_ASFLAG}"                                                 \
-    make default_cflags= CXX= BUILD_CFLAGS="${HOST_CFLAG}"                    \
-         BUILD_CPPFLAGS="${OSX_CPP}" BUILD_LDFLAGS="${HOST_LDFLAG} ${OSX_LD}" \
-         all
-
-    echo "Installing glibc library ..."
-
-    make default_cflags= CXX= BUILD_CFLAGS="${HOST_CFLAG}"                    \
-         BUILD_CPPFLAGS="${OSX_CPP}" BUILD_LDFLAGS="${HOST_LDFLAG} ${OSX_LD}" \
-         install_root="${WDIR}/gcc_built/${CFG_TARGET}/sysroot"               \
-         install
-popd
-
-# save space ... clean up
-rm -rf "${WDIR}/build/glibc-core"
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/gmp_host.sh

@@ -1,47 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-GMP_HOST=$HOST
-OSX_CONFIG=
-case "${HOST}" in
-    *darwin*)
-        OSX_CONFIG="--with-pic"
-        ;;
-    *power*)
-        GMP_HOST="power8-pc-linux-gnu"
-        ;;
-esac
-
-rm -rf "${WDIR}/build/gmp-host"
-mkdir "${WDIR}/build/gmp-host"
-pushd "${WDIR}/build/gmp-host"
-
-    CC="${HOST}-gcc"                          \
-    CFLAGS="-pipe ${HOST_CFLAG} -fexceptions" \
-    LDFLAGS="${HOST_LDFLAG}"                  \
-    bash "${WDIR}/gmp/configure"              \
-        --build=${HOST}                       \
-        --host=${GMP_HOST}                    \
-        --prefix="${WDIR}/buildtools"         \
-        --enable-fft                          \
-        --enable-cxx                          \
-        --disable-shared                      \
-        --enable-static ${OSX_CONFIG}
-
-    echo "Building gmp ..."
-    make
-
-    echo "Checking gmp ..."
-    make -s check
-
-    echo "Installing gmp ..."
-    make install
-
-popd
-
-# clean up ...
-rm -rf "${WDIR}/build/gmp-host"
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/gmp_target.sh

@@ -1,49 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-GMP_HOST=$CFG_TARGET
-OSX_CONFIG=
-case "${CFG_TARGET}" in
-    *darwin*)
-        OSX_CONFIG="--with-pic"
-        ;;
-    *power*)
-        GMP_HOST="power8-pc-linux-gnu"
-        ;;
-esac
-
-rm -rf "${WDIR}/build/gmp-target"
-mkdir "${WDIR}/build/gmp-target"
-pushd "${WDIR}/build/gmp-target"
-
-    CC="${CFG_TARGET}-gcc"                    \
-    CXX="${CFG_TARGET}-g++"                   \
-    CFLAGS="${ARCH_CFLAG} -fexceptions"       \
-    CXXFLAGS="${ARCH_CFLAG}"                  \
-    LDFLAGS="${TARGET_LDFLAG} ${ARCH_LDFLAG}" \
-    bash "${WDIR}/gmp/configure"              \
-        --build=${HOST}                       \
-        --host=${GMP_HOST}                    \
-        --prefix=/usr                         \
-        --enable-fft                          \
-        --enable-cxx                          \
-        --enable-shared                       \
-        --enable-static ${OSX_CONFIG}
-
-    echo "Building gmp ..."
-    make
-
-    # don't test here as C++ runtime is not working
-    # for built toolchain at this point
-
-    echo "Installing gmp ..."
-    make install DESTDIR="${WDIR}/gcc_built/${CFG_TARGET}/sysroot"
-
-popd
-
-# clean up ...
-rm -rf "${WDIR}/build/gmp-target"
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/isl_host.sh

@@ -1,38 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/isl-host"
-mkdir "${WDIR}/build/isl-host"
-pushd "${WDIR}/build/isl-host"
-
-    CFLAGS="-pipe ${HOST_CFLAG}"               \
-    CXXFLAGS="-pipe ${HOST_CFLAG}"             \
-    LDFLAGS="${HOST_LDFLAG}"                   \
-    bash "${WDIR}/isl/configure"               \
-        --build=${HOST}                        \
-        --host=${HOST}                         \
-        --prefix="${WDIR}/buildtools"          \
-        "${extra_config[@]}"                   \
-        --disable-shared                       \
-        --enable-static                        \
-        --with-gmp=system                      \
-        --with-gmp-prefix="${WDIR}/buildtools" \
-        --with-clang=no
-
-    echo "Building ISL ..."
-    make
-
-    echo "Checking ISL ..."
-    make -s check
-
-    echo "Installing ISL ..."
-    make install
-
-popd
-
-# clean up ...
-rm -rf "${WDIR}/build/isl-host"
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/kernel_headers.sh

@@ -1,44 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/kernel-headers"
-mkdir -p "${WDIR}/build/kernel-headers"
-pushd "${WDIR}/build/kernel-headers"
-
-    case "${CFG_ARCH}:64" in
-        arm:64) kernel_arch="arm64";;
-        *) kernel_arch="${CFG_ARCH}";;
-    esac
-
-    echo "Installing kernel headers"
-    make -C "${WDIR}/linux"                                            \
-        BASH="$(which bash)"                                           \
-        HOSTCC="${HOST}-gcc"                                           \
-        CROSS_COMPILE="${CFG_TARGET}-"                                 \
-        O="${WDIR}/build/kernel-headers"                               \
-        ARCH=${kernel_arch}                                            \
-        INSTALL_HDR_PATH="${WDIR}/gcc_built/${CFG_TARGET}/sysroot/usr" \
-        V=0                                                            \
-        headers_install
-
-    echo "Checking installed headers"
-    make -C "${WDIR}/linux"                                            \
-        BASH="$(which bash)"                                           \
-        HOSTCC="${HOST}-gcc"                                           \
-        CROSS_COMPILE="${CFG_TARGET}-"                                 \
-        O="${WDIR}/build/kernel-headers"                               \
-        ARCH=${kernel_arch}                                            \
-        INSTALL_HDR_PATH="${WDIR}/gcc_built/${CFG_TARGET}/sysroot/usr" \
-        V=0                                                            \
-        headers_check
-
-    find "${WDIR}/gcc_built/${CFG_TARGET}/sysroot" -type f \
-        \( -name '.install' -o -name '..install.cmd' -o -name '.check' -o -name '..check.cmd' \) -exec rm {} \;
-
-popd
-
-# clean up ...
-rm -rf "${WDIR}/build/kernel-headers"

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/libelf_target.sh

@@ -1,35 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/libelf-target"
-mkdir -p "${WDIR}/build/libelf-target"
-pushd "${WDIR}/build/libelf-target"
-
-    CC="${CFG_TARGET}-gcc"          \
-    RANLIB="${CFG_TARGET}-ranlib"   \
-    CFLAGS="${ARCH_CFLAG} -fPIC"    \
-    LDFLAGS="${TARGET_LDFLAG}"      \
-    bash "${WDIR}/libelf/configure" \
-        --build=${HOST}             \
-        --host=${CFG_TARGET}        \
-        --target=${CFG_TARGET}      \
-        --prefix=/usr               \
-        --enable-compat             \
-        --enable-elf64              \
-        --enable-extended-format    \
-        --enable-static             \
-        --enable-shared
-
-    echo "Building libelf ..."
-    make
-
-    echo "Installing libelf ..."
-    make instroot="${WDIR}/gcc_built/${CFG_TARGET}/sysroot" install
-popd
-
-# clean up ...
-rm -rf "${WDIR}/build/libelf-target"
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/libiconv_host.sh

@@ -1,37 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-case "${HOST}" in
-    *linux*)
-        exit 0
-        ;;
-esac
-
-rm -rf "${WDIR}/build/libiconv-host"
-mkdir "${WDIR}/build/libiconv-host"
-pushd "${WDIR}/build/libiconv-host"
-
-    CFLAGS="-pipe ${HOST_CFLAG}"      \
-    LDFLAGS="${HOST_LDFLAG}"          \
-    bash "${WDIR}/libiconv/configure" \
-        --build=${HOST}               \
-        --host="${HOST}"              \
-        --prefix="${WDIR}/buildtools" \
-        --enable-static               \
-        --disable-shared              \
-        --disable-nls
-
-    echo "Building libiconv ..."
-    make CC="${HOST}-gcc -pipe ${HOST_CFLAG}"
-
-    echo "Installing libiconv ..."
-    make CC="${HOST}-gcc -pipe ${HOST_CFLAG}" install
-
-popd
-
-# clean up ...
-rm -rf "${WDIR}/build/libiconv-host"
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/ltrace_target.sh

@@ -1,39 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/ltrace-target"
-mkdir -p "${WDIR}/build/ltrace-target"
-pushd "${WDIR}/build/ltrace-target"
-    cp -r "${WDIR}"/ltrace/* .
-
-    EXTRA_CONFIG=
-    if [ "${CFG_ARCH}" = "arm" ]; then
-        cp $BUILD_PREFIX/share/libtool/build-aux/config.* config/autoconf/.
-        EXTRA_CONFIG="--disable-werror"
-    fi
-    # fixes a quirk in makefile, which uses cpu part of triplet
-    # to determine subfolder name ...
-    pushd "sysdeps/linux-gnu"
-    ln -s ppc powerpc64le
-    popd
-
-    CONFIG_SHELL="/bin/bash"   \
-    LDFLAGS="${TARGET_LDFLAG}" \
-    bash ./configure           \
-        --build=${HOST}        \
-        --host=${CFG_TARGET}   \
-        --prefix=/usr          \
-        ${EXTRA_CONFIG}        \
-        --with-gnu-ld
-
-    echo "Building ltrace ..."
-    make
-
-    echo "Installing ltrace ..."
-    make DESTDIR="${WDIR}/gcc_built/${CFG_TARGET}/debug-root" install
-
-popd
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/mpc_host.sh

@@ -1,35 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/mpc-host"
-mkdir "${WDIR}/build/mpc-host"
-pushd "${WDIR}/build/mpc-host"
-
-    CFLAGS="-pipe ${HOST_CFLAG}"         \
-    LDFLAGS="${HOST_LDFLAG}"             \
-    bash "${WDIR}/mpc/configure"         \
-        --build=${HOST}                  \
-        --host=${HOST}                   \
-        --prefix="${WDIR}/buildtools"    \
-        --with-gmp="${WDIR}/buildtools"  \
-        --with-mpfr="${WDIR}/buildtools" \
-        --disable-shared                 \
-        --enable-static
-
-    echo "Building mpc ..."
-    make
-
-    echo "Checking mpc ..."
-    make -s check
-
-    echo "Installing mpc ..."
-    make install
-
-popd
-
-# clean up ...
-rm -rf "${WDIR}/build/mpc-host"
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/mpfr_host.sh

@@ -1,42 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-EXTRA_CONFIG="--enable-thread-safe"
-case "${HOST}" in
-    *darwin*) EXTRA_CONFIG="--disable-thread-safe";;
-esac
-
-rm -rf "${WDIR}/build/mpfr-host"
-mkdir "${WDIR}/build/mpfr-host"
-pushd "${WDIR}/build/mpfr-host"
-
-    CC="${HOST}-gcc"                    \
-    CFLAGS="-pipe ${HOST_CFLAG}"        \
-    LDFLAGS="${HOST_LDFLAG}"            \
-    bash "${WDIR}/mpfr/configure"       \
-        --build=${HOST}                 \
-        --host=${HOST}                  \
-        --prefix="${WDIR}/buildtools"   \
-        --with-gmp="${WDIR}/buildtools" \
-        --disable-shared                \
-        --enable-static                 \
-        ${EXTRA_CONFIG}
-
-    echo "Building mpfr ..."
-    make
-
-    # on s390x there are runtime failures with some c++ tests, so ignore them ...
-    echo "Checking mpfr ..."
-    make -s check || true
-
-    echo "Installing mpfr ..."
-    make install
-
-popd
-
-# clean up ...
-rm -rf "${WDIR}/build/mpfr-host"
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/ncurses_build.sh

@@ -1,38 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/ncurses-build"
-mkdir "${WDIR}/build/ncurses-build"
-pushd "${WDIR}/build/ncurses-build"
-
-    CFLAGS="${HOST_CFLAG}"                         \
-    LDFLAGS="${HOST_LDFLAG}"                       \
-    bash "${WDIR}/ncurses/configure"               \
-        --build=${HOST}                            \
-        --host=${HOST}                             \
-        --prefix=""                                \
-        --with-install-prefix="${WDIR}/buildtools" \
-        --without-debug                            \
-        --enable-termcap                           \
-        --enable-symlinks                          \
-        --without-manpages                         \
-        --without-tests                            \
-        --without-cxx                              \
-        --without-cxx-binding                      \
-        --without-ada                              \
-        --without-fallbacks
-
-    echo "Building ncurses ..."
-    make
-
-    echo "Installing ncurses ..."
-    STRIP="${HOST}-strip" make "install.progs"
-
-popd
-
-# clean up ...
-rm -rf "${WDIR}/build/ncurses-build"
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/ncurses_host.sh

@@ -1,39 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/ncurses-host"
-mkdir "${WDIR}/build/ncurses-host"
-pushd "${WDIR}/build/ncurses-host"
-
-    CFLAGS="-pipe ${HOST_CFLAG}"           \
-    LDFLAGS="${HOST_LDFLAG}"               \
-    bash "${WDIR}/ncurses/configure"       \
-        --build=${HOST}                    \
-        --host=${HOST}                     \
-        --prefix="${WDIR}/buildtools"      \
-        --with-install-prefix="${destdir}" \
-        --without-debug                    \
-        --enable-termcap                   \
-        --enable-symlinks                  \
-        --without-manpages                 \
-        --without-tests                    \
-        --without-cxx                      \
-        --without-cxx-binding              \
-        --without-ada                      \
-        --disable-database                 \
-        --disable-db-install               \
-        --with-fallbacks="linux,xterm,xterm-color,xterm-256color,vt100" 
-
-    echo "Building ncurses ..."
-    make
-
-    echo "Installing ncurses ..."
-    STRIP="${HOST}-strip" make install
-
-popd
-
-# clean up ...
-rm -rf "${WDIR}/build/ncurses-host"

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/ncurses_target.sh

@@ -1,33 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/ncurses-target"
-mkdir "${WDIR}/build/ncurses-target"
-pushd "${WDIR}/build/ncurses-target"
-
-    CFLAGS="${ARCH_CFLAG}"                                              \
-    LDFLAGS="${TARGET_LDFLAG}"                                          \
-    bash "${WDIR}/ncurses/configure"                                    \
-        --build=${HOST}                                                 \
-        --host=${CFG_TARGET}                                            \
-        --prefix="/usr"                                                 \
-        --with-install-prefix="${WDIR}/gcc_built/${CFG_TARGET}/sysroot" \
-        --without-debug                                                 \
-        --enable-termcap                                                \
-        --with-shared                                                   \
-        --without-sysmouse
-
-    echo "Building ncurses ..."
-    make
-
-    echo "Installing ncurses ..."
-    STRIP="${CFG_TARGET}-strip" make install
-
-popd
-
-# clean up ...
-rm -rf "${WDIR}/build/ncurses-target"
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/strace_target.sh

@@ -1,29 +0,0 @@
-#!/bin/bash
-
-set -e
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/strace-target"
-mkdir -p "${WDIR}/build/strace-target"
-pushd "${WDIR}/build/strace-target"
-
-    CC="${CFG_TARGET}-gcc"                            \
-    CFLAGS="${ARCH_CFLAG}"                           \
-    LDFLAGS="${TARGET_LDFLAG} ${ARCH_LDFLAG}"        \
-    CPP="${CFG_TARGET}-cpp"                           \
-    LD="${CFG_TARGET}-ld"                             \
-    bash "${WDIR}/strace/configure"            \
-        --build=${HOST}                           \
-        --host=${CFG_TARGET}                          \
-        --prefix=/usr                                \
-        --enable-mpers=check
-
-    echo "Building strace ..."
-    make
-
-    echo "Installing strace ..."
-    make DESTDIR="${WDIR}/gcc_built/${CFG_TARGET}/debug-root" install
-
-popd
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/build_scripts/zlib_host.sh

@@ -1,31 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-rm -rf "${WDIR}/build/zlib-host"
-mkdir -p "${WDIR}/build/zlib-host"
-pushd "${WDIR}/build/zlib-host"
-
-    CFLAGS="-pipe ${HOST_CFLAG}"      \
-    LDFLAGS="${HOST_LDFLAG}"          \
-    CHOST="${HOST}"                   \
-    bash "${WDIR}/zlib/configure"     \
-        --prefix="${WDIR}/buildtools" \
-        --static
-
-    echo "Building zlib ..."
-    make
-
-    echo "Checking zlib ..."
-    make -s test
-
-    echo "Installing zlib ..."
-    make install
-
-popd
-
-# clean up ...
-rm -rf "${WDIR}/build/zlib-host"
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/c11threads.c

@@ -1,6 +0,0 @@
-#include <threads.h>
-int main() {
-    mtx_t mutex;
-    mtx_init(&mutex, mtx_plain);
-}
-

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/cleanup.sh

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-set -e
-
-printf "Cleaning up intermediate files ..."
-
-for f in build gcc_built buildtools binutils gcc_toolchain-sources \
-         libelf mpfr expat glibc glibc-ports gmp linux ncurses gcc \
-         isl mpc zlib libiconv gettext duma ltrace strace gdb; do
-    printf "\rCleaning up intermediate files ...                   \r"
-    printf "Cleaning up intermediate files ... $f"
-    rm -rf $f
-done
-
-printf "\rCleaning up intermediate files done                            \n"
-
-exit 0

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/conda_build_config.yaml

@@ -1,49 +0,0 @@
-c_compiler_version:
-  - 7.5.0
-cxx_compiler_version:
-  - 7.5.0
-cpu_arch:
-  - x86_64       # [linux and x86_64]
-  - s390x        # [linux and s390x]
-  - powerpc64le  # [linux and ppc64le]
-  - aarch64      # [linux and aarch64]
-  - dummy        # [not linux]
-gcc_version:
-  - 11.2.0
-libgfortran_soname:
-  - 5
-gcc_version_build_number:
-  - 0
-_libgcc_mutex:
-  - 0.1 main
-duma_version:
-   - 2.5.15
-gnu:
-  - 2.17          # [not aarch64]
-  - 2.26          # [aarch64]
-conda_glibc_ver:
-  - 2.17          # [not aarch64]
-  - 2.26          # [aarch64]
-kernel_version:
-  - 3.10.0        # [not aarch64]
-  - 4.18.20       # [aarch64]
-gdb_version:
-   - 11.2
-gdb_server_version:
-   - 11.2
-strace_version:
-   - 5.16
-ltrace_version:
-   - 0.7.3         # [not aarch64]
-   - 0.7.91        # [aarch64]
-openmp_ver:
-  - 5.1
-libgomp_ver:
-  - 1.0.0
-
-zip_keys:
-  - - kernel_version
-    - conda_glibc_ver
-    - cpu_arch
-  - - gcc_version
-    - libgfortran_soname

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/decompress.sh

@@ -1,71 +0,0 @@
-#!/bin/bash
-
-. ${RECIPE_DIR}/build_scripts/build_env.sh
-
-set -e
-echo "Fetching sources ..."
-
-rm -rf gcc_toolchain-sources
-git clone -b "gcc-11.2-${target_platform}" https://github.com/AnacondaRecipes/gcc_toolchain-sources
-
-echo "Extracting sources ..."
-
-pushd "gcc_toolchain-sources"
-
-for f in *.tar.*; do
-    H=${f/\.tar.*/}
-    B="$(sed -r -e 's/(\-|_)+[0-9].*//' <<<"${H}" )"
-    H="$(sed -r -e 's/\.[a-z].*//' <<<"${H}" )"
-    HH=${H/_/\-}
-    H="$(sed -r -e 's/\.[a-z].*//' <<<"${H}" )"
-    F="$(sed -r -e 's/.*\.tar.(.*)/\1/' <<<"${f}" )"
-    C=""
-    if [ "${F}" == bz2 ]; then
-      C="j"
-    elif [ "${F}" == xz ]; then
-      C="J"
-    elif [ "${F}" == gz ]; then
-      C="z"
-    fi
-    printf "\rUncompress                       \rUncompress ${H} ... "
-    rm -rf ${WDIR}/${B} ${WDIR}/${H} ${WDIR}/${HH}
-    cp $f ${WDIR}/.
-    pushd "${WDIR}"
-      tar -x${C}f $f
-      if [ -d ./${H} ]; then
-          mv $H $B
-       elif [ -d ./${HH} ]; then
-          mv $HH $B
-      else
-          echo "\nCannot find extracted $H nor $HH ... please check"
-          exit 1
-      fi
-      # remove copied tar file after decompression ...
-      rm -f $f
-    popd
-done
-
-printf "\rUncompressed all source packages successful!              \n"
-
-# create ports support for glibc
-ln -s §{WDIR}/glibc-ports ${WDIR}/glibc/ports
-
-CUR=$PWD/patches
-
-for f in binutils duma gcc gdb glibc "glibc-ports" gmp libelf ltrace; do
-    echo "Patching $f ..."
-    pushd "${WDIR}/${f}"
-    for g in ${CUR}/${f}/*.patch; do echo "proocess ${g}"; patch -f -p1 -g0 -F1 -i $g; done
-    popd
-done
-
-case "${HOST}" in
-    *linux*)
-        # we don't need them on linux architectures ... part of glibc
-        rm -rf ${WDIR}/gettext ${WDIR}/libiconv
-        ;;
-esac
-
-popd
-
-exit 0

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/hello-world.cpp

@@ -1,7 +0,0 @@
-#include <iostream>
-
-int main(int argc, char * argv[])
-{
-    std::cout << "Hello World!\n" << std::endl;
-    return 0;
-}

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/install_scripts/install-duma.sh

@@ -1,10 +0,0 @@
-set -e -x
-
-CHOST=$(${SRC_DIR}/build/gcc-final/gcc/xgcc -dumpmachine)
-export PATH=${SRC_DIR}/gcc_built/bin:${SRC_DIR}/buildtools/bin:${SRC_DIR}/compilers/bin:${PATH}
-
-pushd ${SRC_DIR}/build/duma-target
-  make prefix=${PREFIX} HOSTCC=$(uname -m)-build_pc-linux-gnu-gcc CC=${CHOST}-gcc CXX=${CHOST}-g++ RANLIB=${CHOST}-ranlib OS=linux DUMA_CPP=1 install
-popd
-
-source ${RECIPE_DIR}/install_scripts/make_tool_links.sh

miniconda3/pkgs/_openmp_mutex-5.1-1_gnu/info/recipe/parent/install_scripts/install-g++.sh

@@ -1,56 +0,0 @@
-set -e -x
-
-CHOST=$(${SRC_DIR}/build/gcc-final/gcc/xgcc -dumpmachine)
-declare -a COMMON_MAKE_OPTS=()
-COMMON_MAKE_OPTS+=(prefix=${PREFIX} exec_prefix=${PREFIX})
-
-_libdir=libexec/gcc/${CHOST}/${PKG_VERSION}
-# libtool wants to use ranlib that is here, macOS install doesn't grok -t etc
-# .. do we need this scoped over the whole file though?
-export PATH=${SRC_DIR}/gcc_built/bin:${SRC_DIR}/buildtools/bin:${SRC_DIR}/compilers/bin:${PATH}
-
-pushd ${SRC_DIR}/build/gcc-final/
-
-make -C gcc "${COMMON_MAKE_OPTS[@]}" c++.install-common
-
-# How it used to be:
-# install -m755 -t ${PREFIX}/bin/ gcc/{cc1plus,lto1}
-for file in cc1plus; do
-  if [[ -f gcc/${file} ]]; then
-    install -c gcc/${file} ${PREFIX}/${_libdir}/${file}
-  fi
-done
-
-# Following 3 are in libstdcxx-devel
-#make -C $CHOST/libstdc++-v3/src "${COMMON_MAKE_OPTS[@]}" install
-#make -C $CHOST/libstdc++-v3/include "${COMMON_MAKE_OPTS[@]}" install
-#make -C $CHOST/libstdc++-v3/libsupc++ "${COMMON_MAKE_OPTS[@]}" install
-make -C $CHOST/libstdc++-v3/python "${COMMON_MAKE_OPTS[@]}" install
-
-# Probably don't want to do this for cross-compilers
-# mkdir -p ${PREFIX}/share/gdb/auto-load/usr/lib/
-# cp ${SRC_DIR}/gcc_built/${CHOST}/sysroot/lib/libstdc++.so.6.*-gdb.py ${PREFIX}/share/gdb/auto-load/usr/lib/
-
-make -C libcpp "${COMMON_MAKE_OPTS[@]}" install
-
-popd
-
-set +x
-# Strip executables, we may want to install to a different prefix
-# and strip in there so that we do not change files that are not
-# part of this package.
-pushd ${PREFIX}
-  _files=$(find . -type f)
-  for _file in ${_files}; do
-    _type="$( file "${_file}" | cut -d ' ' -f 2- )"
-    case "${_type}" in
-      *script*executable*)
-      ;;
-      *executable*)
-        ${SRC_DIR}/gcc_built/bin/${CHOST}-strip --strip-unneeded -v "${_file}" || :
-      ;;
-    esac
-  done
-popd
-
-source ${RECIPE_DIR}/install_scripts/make_tool_links.sh