/*
* Copyright (C) 2008-2011 Teluu Inc. (http://www.teluu.com)
* Copyright (C) 2003-2008 Benny Prijono <benny@prijono.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __PJ_DOXYGEN_H__
#define __PJ_DOXYGEN_H__
/**
* @file doxygen.h
* @brief Doxygen's mainpage.
*/
/*////////////////////////////////////////////////////////////////////////// */
/*
INTRODUCTION PAGE
*/
/**
* @mainpage Welcome to PJLIB!
*
* @section intro_sec What is PJLIB
*
* PJLIB is an Open Source, small footprint framework library written in C for
* making scalable applications. Because of its small footprint, it can be used
* in embedded applications (we hope so!), but yet the library is also aimed for
* facilitating the creation of high performance protocol stacks.
*
* PJLIB is released under GPL terms.
*
* @section download_sec Download
*
* PJLIB and all documentation can be downloaded from
* http://www.pjsip.org.
*
*
* @section how_to_use_sec About This Documentation
*
* This document is generated directly from PJLIB source file using
* \a doxygen (http://www.doxygen.org). Doxygen is a great (and free!)
* tools for generating such documentation.
*
*
* @subsection find_samples_subsec How to Read This Document
*
* This documentation is laid out more to be a reference guide instead
* of tutorial, therefore first time users may find it difficult to
* grasp PJLIB by reading this document alone.
*
* However, we've tried our best to make this document easy to follow.
* For first time users, we would suggest that you follow these steps
* when reading this documentation:
*
* - continue reading this introduction chapter. At the end of this
* chapter, you'll find section called \ref pjlib_fundamentals_sec
* which should guide you to understand basic things about PJLIB.
*
* - find information about specific features that you want to use
* in PJLIB. Use the <b>Module Index</b> to find out about all
* features in PJLIB (if you're browsing the HTML documentation,
* click on the \a Module link on top of the page, or if you're
* reading the PDF documentation, click on \a Module \a Documentation
* on the navigation pane on the left).
*
* @subsection doc_organize_sec How To's
*
* Please find below links to specific tasks that you probably
* want to do:
*
* - <b>How to Build PJLIB</b>
*\n
* Please refer to \ref pjlib_build_sys_pg page for more information.
*
* - <b>How to Use PJLIB in My Application</b>
*\n
* Please refer to \ref configure_app_sec for more information.
*
* - <b>How to Port PJLIB</b>
*\n
* Please refer to \ref porting_pjlib_pg page.
*
* - <b>Where to Read Samples Documentation</b>
*\n
* Most of the modules provide link to the corresponding sample file.
* Alternatively, to get the list of all examples, you can click on
* <b>Related Pages</b> on the top of HTML document or on
* <b>PJLIB Page Documentation</b> on navigation pane of your PDF reader.
*
* - <b>How to Submit Code to PJLIB Project</b>
*\n
* Please read \ref pjlib_coding_convention_page before submitting
* your code. Send your code as patch against current Subversion tree
* to the appropriate mailing list.
*
*
* @section features_sec Features
*
* @subsection open_source_feat It's Open Source!
*
* PJLIB is currently released on GPL license, but other arrangements
* can be made with the author.
*
* @subsection extreme_portable_feat Extreme Portability
*
* PJLIB is designed to be extremely portable. It can run on any kind
* of processors (16-bit, 32-bit, or 64-bit, big or little endian, single
* or multi-processors) and operating systems. Floating point or no
* floating point. Multi-threading or not.
* It can even run in environment where no ANSI LIBC is available.
*
* Currently PJLIB is known to run on these platforms:
* - Win32/x86 (Win95/98/ME, NT/2000/XP/2003, mingw).
* - arm, WinCE and Windows Mobile.
* - Linux/x86, (user mode and as <b>kernel module</b>(!)).
* - Linux/alpha
* - Solaris/ultra.
* - MacOS X/powerpc
* - RTEMS (x86 and powerpc).
*
* And efforts is under way to port PJLIB on:
* - Symbian OS
*
*
* @subsection small_size_feat Small in Size
*
* One of the primary objectives is to have library that is small in size for
* typical embedded applications. As a rough guidance, we aim to keep the
* library size below 100KB for it to be considered as small.
* As the result, most of the functionalities in the library can be tailored
* to meet the requirements; user can enable/disable specific functionalities
* to get the desired size/performance/functionality balance.
*
* For more info, please see @ref pj_config.
*
*
* @subsection big_perform_feat Big in Performance
*
* Almost everything in PJLIB is designed to achieve the highest possible
* performance out of the target platform.
*
*
* @subsection no_dyn_mem No Dynamic Memory Allocations
*
* The central idea of PJLIB is that for applications to run as fast as it can,
* it should not use \a malloc() at all, but instead should get the memory
* from a preallocated storage pool. There are few things that can be
* optimized with this approach:
*
* - \a alloc() is a O(1) operation.
* - no mutex is used inside alloc(). It is assumed that synchronization
* will be used in higher abstraction by application anyway.
* - no \a free() is required. All chunks will be deleted when the pool is
* destroyed.
*
* The performance gained on some systems can be as high as 30x speed up
* against \a malloc() and \a free() on certain configurations, but of
* course your mileage may vary.
*
* For more information, see \ref PJ_POOL_GROUP
*
*
* @subsection os_abstract_feat Operating System Abstraction
*
* PJLIB has abstractions for features that are normally not portable
* across operating systems:
* - @ref PJ_THREAD
*\n
* Portable thread manipulation.
* - @ref PJ_TLS
*\n
* Storing data in thread's private data.
* - @ref PJ_MUTEX
*\n
* Mutual exclusion protection.
* - @ref PJ_SEM
*\n
* Semaphores.
* - @ref PJ_ATOMIC
*\n
* Atomic variables and their operations.
* - @ref PJ_CRIT_SEC
*\n
* Fast locking of critical sections.
* - @ref PJ_LOCK
*\n
* High level abstraction for lock objects.
* - @ref PJ_EVENT
*\n
* Event object.
* - @ref PJ_TIME
*\n
* Portable time manipulation.
* - @ref PJ_TIMESTAMP
*\n
* High resolution time value.
* - etc.
*
*
* @subsection ll_network_io_sec Low-Level Network I/O
*
* PJLIB has very portable abstraction and fairly complete set of API for
* doing network I/O communications. At the lowest level, PJLIB provides:
*
* - @ref PJ_SOCK
*\n
* A highly portable socket abstraction, runs on all kind of
* network APIs such as standard BSD socket, Windows socket, Linux
* \b kernel socket, PalmOS networking API, etc.
*
* - @ref pj_addr_resolve
*\n
* Portable address resolution, which implements #pj_gethostbyname().
*
* - @ref PJ_SOCK_SELECT
*\n
* A portable \a select() like API (#pj_sock_select()) which can be
* implemented with various back-end.
*
*
*
* @subsection timer_mgmt_sec Timer Management
*
* A passive framework for managing timer, see @ref PJ_TIMER for more info.
* There is also function to retrieve high resolution timestamp
* from the system (see @ref PJ_TIMESTAMP).
*
*
* @subsection data_struct_sec Various Data Structures
*
* Various data structures are provided in the library:
*
* - @ref PJ_PSTR
* - @ref PJ_ARRAY
* - @ref PJ_HASH
* - @ref PJ_LIST
* - @ref PJ_RBTREE
*
*
* @subsection exception_sec Exception Construct
*
* A convenient TRY/CATCH like construct to propagate errors, which by
* default are used by the @ref PJ_POOL_GROUP "memory pool" and
* the lexical scanner in pjlib-util. The exception
* construct can be used to write programs like below:
*
* <pre>
* #define SYNTAX_ERROR 1
*
* PJ_TRY {
* msg = NULL;
* msg = parse_msg(buf, len);
* }
* PJ_CATCH ( SYNTAX_ERROR ) {
* .. handle error ..
* }
* PJ_END;
* </pre>
*
* Please see @ref PJ_EXCEPT for more information.
*
*
* @subsection logging_sec Logging Facility
*
* PJLIB @ref PJ_LOG consists of macros to write logging information to
* some output device. Some of the features of the logging facility:
*
* - the verbosity can be fine-tuned both at compile time (to control
* the library size) or run-time (to control the verbosity of the
* information).
* - output device is configurable (e.g. stdout, printk, file, etc.)
* - log decoration is configurable.
*
* See @ref PJ_LOG for more information.
*
*
* @subsection guid_gen_sec Random and GUID Generation
*
* PJLIB provides facility to create random string
* (#pj_create_random_string()) or globally unique identifier
* (see @ref PJ_GUID).
*
*
*
* @section configure_app_sec Configuring Application to use PJLIB
*
* @subsection pjlib_compil_sec Building PJLIB
*
* Follow the instructions in \ref pjlib_build_sys_pg to build
* PJLIB.
*
* @subsection pjlib_compil_app_sec Building Applications with PJLIB
*
* Use the following settings when building applications with PJLIB.
*
* @subsubsection compil_inc_dir_sec Include Search Path
*
* Add this to your include search path ($PJLIB is PJLIB root directory):
* <pre>
* $PJLIB/include
* </pre>
*
* @subsubsection compil_inc_file_sec Include PJLIB Header
*
* To include all PJLIB headers:
* \verbatim
#include <pjlib.h>
\endverbatim
*
* Alternatively, you can include individual PJLIB headers like this:
* \verbatim
#include <pj/log.h>
#include <pj/os.h>
\endverbatim
*
*
* @subsubsection compil_lib_dir_sec Library Path
*
* Add this to your library search path:
* <pre>
* $PJLIB/lib
* </pre>
*
* Then add the appropriate PJLIB library to your link specification. For
* example, you would add \c libpj-i386-linux-gcc.a when you're building
* applications in Linux.
*
*
* @subsection pjlib_fundamentals_sec Principles in Using PJLIB
*
* Few things that you \b MUST do when using PJLIB, to make sure that
* you create trully portable applications.
*
* @subsubsection call_pjlib_init_sec Call pj_init()
*
* Before you do anything else, call \c pj_init(). This would make sure that
* PJLIB system is properly set up.
*
* @subsubsection no_ansi_subsec Do NOT Use ANSI C
*
* Contrary to popular teaching, ANSI C (and LIBC) is not the most portable
* library in the world, nor it's the most ubiquitous. For example, LIBC
* is not available in Linux kernel. Also normally LIBC will be excluded
* from compilation of RTOSes to reduce size.
*
* So for maximum portability, do NOT use ANSI C. Do not even try to include
* any other header files outside <include/pj>. Stick with the functionalities
* provided by PJLIB.
*
*
* @subsubsection string_rep_subsubsec Use pj_str_t instead of C Strings
*
* PJLIB uses pj_str_t instead of normal C strings. You SHOULD follow this
* convention too. Remember, ANSI string-h is not always available. And
* PJLIB string is faster!
*
* @subsubsection mem_alloc_subsubsec Use Pool for Memory Allocations
*
* You MUST NOT use \a malloc() or any other memory allocation functions.
* Use PJLIB @ref PJ_POOL_GROUP instead! It's faster and most portable.
*
* @subsection logging_subsubsec Use Logging for Text Display
*
* DO NOT use <stdio.h> for text output. Use PJLIB @ref PJ_LOG instead.
*
*
* @section porting_pjlib_sec0 Porting PJLIB
*
* Please see \ref porting_pjlib_pg page on more information to port
* PJLIB to new target.
*
* @section enjoy_sec Enjoy Using PJLIB!
*
* We hope that you find PJLIB usefull for your application. If you
* have any questions, suggestions, critics, bug fixes, or anything
* else, we would be happy to hear it.
*
* Enjoy using PJLIB!
*
* Benny Prijono < bennylp at pjsip dot org >
*/
/*////////////////////////////////////////////////////////////////////////// */
/*
CODING CONVENTION
*/
/**
* @page pjlib_coding_convention_page Coding Convention
*
* Before you submit your code/patches to be included with PJLIB, you must
* make sure that your code is compliant with PJLIB coding convention.
* <b>This is very important!</b> Otherwise we would not accept your code.
*
* @section coding_conv_editor_sec Editor Settings
*
* The single most important thing in the whole coding convention is editor
* settings. It's more important than the correctness of your code (bugs will
* only crash the system, but incorrect tab size is mental!).
*
* Kindly set your editor as follows:
* - tab size to \b 8.
* - indentation to \b 4.
*
* With \c vi, you can do it with:
* <pre>
* :se ts=8
* :se sts=4
* </pre>
*
* You should replace tab with eight spaces.
*
* @section coding_conv_detail_sec Coding Style
*
* Coding style MUST strictly follow K&R style. The rest of coding style
* must follow current style. You SHOULD be able to observe the style
* currently used by PJLIB from PJLIB sources, and apply the style to your
* code. If you're not able to do simple thing like to observe PJLIB
* coding style from the sources, then logic dictates that your ability to
* observe more difficult area in PJLIB such as memory allocation strategy,
* concurrency, etc is questionable.
*
* @section coding_conv_comment_sec Commenting Your Code
*
* Public API (e.g. in header files) MUST have doxygen compliant comments.
*
*/
/*////////////////////////////////////////////////////////////////////////// */
/*
BUILDING AND INSTALLING PJLIB
*/
/**
* @page pjlib_build_sys_pg Building, and Installing PJLIB
*
* @section build_sys_install_sec Build and Installation
*
* \note
* <b>The most up-to-date information on building and installing PJLIB
* should be found in the website, under "Getting Started" document.
* More over, the new PJLIB build system is now based on autoconf,
* so some of the information here might not be relevant anymore
* (although most still are, since the autoconf script still use
* the old Makefile system as the backend).</b>
*
* @subsection build_sys_install_win32_sec Visual Studio
*
* The PJLIB Visual Studio workspace supports the building of PJLIB
* for Win32 target. Although currently only the Visual Studio 6 Workspace is
* actively maintained, developers with later version of Visual Studio
* can easily imports VS6 workspace into their IDE.
*
* To start building PJLIB projects with Visual Studio 6 or later, open
* the \a workspace file in the corresponding \b \c build directory. You have
* several choices on which \a dsw file to open:
\verbatim
$PJPROJECT/pjlib/build/pjlib.dsw
$PJPROJECT/pjsip/build/pjsip.dsw
..etc
\endverbatim
*
* The easiest way is to open <tt>pjsip_apps.dsw</tt> file in \b \c $PJPROJECT/pjsip-apps/build
* directory, and build pjsua project or the samples project.
* However this will not build the complete projects.
* For example, the PJLIB test is not included in this workspace.
* To build the complete projects, you must
* open and build each \a dsw file in \c build directory in each
* subprojects. For example, to open the complete PJLIB workspace, open
* <tt>pjlib.dsw</tt> in <tt>$PJPROJECT/pjlib/build</tt> directory.
*
*
* @subsubsection config_site_create_vc_sec Create config_site.h
*
* The file <tt><b>$PJPROJECT/pjlib/include/pj/config_site.h</b></tt>
* is supposed to contain configuration that is specific to your site/target.
* This file is not part of PJLIB, so you must create it yourself. Normally
* you just need to create a blank file.
*
* The reason why it's not included in PJLIB is so that you would not accidently
* overwrite your site configuration.
*
* If you fail to do this, Visual C will complain with error like:
*
* <b>"fatal error C1083: Cannot open include file: 'pj/config_site.h': No such file
* or directory"</b>.
*
* @subsubsection build_vc_subsubsec Build the Projects
*
* Just hit the build button!
*
*
* @subsection build_sys_install_unix_sec Make System
*
* For other targets, PJLIB provides a rather comprehensive build system
* that uses GNU \a make (and only GNU \a make will work).
* Currently, the build system supports building * PJLIB for these targets:
* - i386/Win32/mingw
* - i386/Linux
* - i386/Linux (kernel)
* - alpha/linux
* - sparc/SunOS
* - etc..
*
*
* @subsubsection build_req_sec Requirements
*
* In order to use the \c make based build system, you MUST have:
*
* - <b>GNU make</b>
*\n
* The Makefiles heavily utilize GNU make commands which most likely
* are not available in other \c make system.
* - <b>bash</b> shell is recommended.
*\n
* Specificly, there is a command <tt>"echo -n"</tt> which may not work
* in other shells. This command is used when generating dependencies
* (<tt>make dep</tt>) and it's located in
* <tt>$PJPROJECT/build/rules.mak</tt>.
* - <b>ar</b>, <b>ranlib</b> from GNU binutils
*\n
* In your system has different <tt>ar</tt> or <tt>ranlib</tt> (e.g. they
* may have been installed as <tt>gar</tt> and <tt>granlib</tt>), then
* either you create the relevant symbolic links, <b>or</b> modify
* <tt>$PJPROJECT/build/cc-gcc.mak</tt> and rename <tt>ar</tt> and
* <tt>ranlib</tt> to the appropriate names.
* - <b>gcc</b> to generate dependency.
*\n
* Currently the build system uses <tt>"gcc -MM"</tt> to generate build
* dependencies. If <tt>gcc</tt> is not desired to generate dependency,
* then either you don't run <tt>make dep</tt>, <b>or</b> edit
* <tt>$PJPROJECT/build/rules.mak</tt> to calculate dependency using
* your prefered method. (And let me know when you do so so that I can
* update the file. :) )
*
* @subsubsection build_overview_sec Building the Project
*
* Generally, steps required to build the PJLIB are:
*
\verbatim
$ cd /home/user/pjproject
$ ./configure
$ touch pjlib/include/pj/config_site.h
$ make dep
$ make
\endverbatim
*
* The above process will build all static libraries and all applications.
*
* \note the <tt>configure</tt> script is not a proper autoconf script,
* but rather a simple shell script to detect current host. This script
* currently does not support cross-compilation.
*
* \note For Linux kernel target, there are additional steps required, which
* will be explained in section \ref linux_kern_target_subsec.
*
* @subsubsection build_mak_sec Cross Compilation
*
* For cross compilation, you will need to edit the \c build.mak file in
* \c $PJPROJECT root directory manually. Please see <b>README-configure</b> file
* in the root directory for more information.
*
* For Linux kernel target, you are also required to declare the following
* variables in this file:
* - \c KERNEL_DIR: full path of kernel source tree.
* - \c KERNEL_ARCH: kernel ARCH options (e.g. "ARCH=um"), or leave blank
* for default.
* - \c PJPROJECT_DIR: full path of PJPROJECT source tree.
*
* Apart from these, there are also additional steps required to build
* Linux kernel target, which will be explained in \ref linux_kern_target_subsec.
*
* @subsubsection build_dir_sec Files in "build" Directory
*
* The <tt>*.mak</tt> files in \c $PJPROJECT/build directory are used to specify
* the configuration for the specified compiler, target machine target
* operating system, and host options. These files will be executed
* (included) by \a make during building process, depending on the values
* specified in <b>$PJPROJECT/build.mak</b> file.
*
* Normally you don't need to edit these files, except when you're porting
* PJLIB to new target.
*
* Below are the description of some files in this directory:
*
* - <tt>rules.mak</tt>: contains generic rules always included during make.
* - <tt>cc-gcc.mak</tt>: rules when gcc is used for compiler.
* - <tt>cc-vc.mak</tt>: rules when MSVC compiler is used.
* - <tt>host-mingw.mak</tt>: rules for building in mingw host.
* - <tt>host-unix.mak</tt>: rules for building in Unix/Posix host.
* - <tt>host-win32.mak</tt>: rules for building in Win32 command console
* (only valid when VC is used).
* - <tt>m-i386.mak</tt>: rules when target machine is an i386 processor.
* - <tt>m-m68k.mak</tt>: rules when target machine is an m68k processor.
* - <tt>os-linux.mak</tt>: rules when target OS is Linux.
* - <tt>os-linux-kernel.mak</tt>: rules when PJLIB is to be build as
* part of Linux kernel.
* - <tt>os-win32.mak</tt>: rules when target OS is Win32.
*
*
* @subsubsection config_site_create_sec Create config_site.h
*
* The file <tt><b>$PJPROJECT/pjlib/include/pj/config_site.h</b></tt>
* is supposed to contain configuration that is specific to your site/target.
* This file is not part of PJLIB, so you must create it yourself.
*
* The reason why it's not included in PJLIB is so that you would not accidently
* overwrite your site configuration.
*
*
* @subsubsection invoking_make_sec Invoking make
*
* Normally, \a make is invoked in \c build directory under each project.
* For example, to build PJLIB, you would invoke \a make in
* \c $PJPROJECT/pjlib/build directory like below:
*
\verbatim
$ cd pjlib/build
$ make
\endverbatim
*
* Alternatively you may invoke <tt>make</tt> in <tt>$PJPROJECT</tt>
* directory, to build all projects under that directory (e.g.
* PJLIB, PJSIP, etc.).
*
*
* @subsubsection linux_kern_target_subsec Linux Kernel Target
*
* \note
* <b>BUILDING APPLICATIONS IN LINUX KERNEL MODE IS A VERY DANGEROUS BUSINESS.
* YOU MAY CRASH THE WHOLE OF YOUR SYSTEM, CORRUPT YOUR HARDISK, ETC. PJLIB
* KERNEL MODULES ARE STILL IN EXPERIMENTAL PHASE. DO NOT RUN IT IN PRODUCTION
* SYSTEMS OR OTHER SYSTEMS WHERE RISK OF LOSS OF DATA IS NOT ACCEPTABLE.
* YOU HAVE BEEN WARNED.</b>
*
* \note
* <b>User Mode Linux (UML)</b> provides excellent way to experiment with Linux
* kernel without risking the stability of the host system. See
* http://user-mode-linux.sourceforge.net for details.
*
* \note
* I only use <b>UML</b> to experiment with PJLIB kernel modules.
* <b>I wouldn't be so foolish to use my host Linux machine to experiment
* with this.</b>
*
* \note
* You have been warned.
*
* For building PJLIB for Linux kernel target, there are additional steps required.
* In general, the additional tasks are:
* - Declare some more variables in <b><tt>build.mak</tt></b> file (this
* has been explained in \ref build_mak_sec above).
* - Perform these two small modifications in kernel source tree.
*
* There are two small modification need to be applied to the kernel tree.
*
* <b>1. Edit <tt>Makefile</tt> in kernel root source tree.</b>
*
* Add the following lines at the end of the <tt>Makefile</tt> in your
* <tt>$KERNEL_SRC</tt> dir:
\verbatim
script:
$(SCRIPT)
\endverbatim
*
* \note Remember to replace spaces with <b>tab</b> in the Makefile.
*
* The modification above is needed to capture kernel's \c $CFLAGS and
* \c $CFLAGS_MODULE which will be used for PJLIB's compilation.
*
* <b>2. Add Additional Exports.</b>
*
* We need the kernel to export some more symbols for our use. So we declare
* the additional symbols to be exported in <tt>extra-exports.c</tt> file, and add
* a this file to be compiled into the kernel:
*
* - Copy the file <tt>extra-exports.c</tt> from <tt>pjlib/src/pj</tt>
* directory to <tt>$KERNEL_SRC/kernel/</tt> directory.
* - Edit <tt>Makefile</tt> in that directory, and add this line
* somewhere after the declaration of that variable:
\verbatim
obj-y += extra-exports.o
\endverbatim
*
* To illustrate what have been done in your kernel source tree, below
* is screenshot of my kernel source tree _after_ the modification.
*
\verbatim
[root@vpc-linux linux-2.6.7]# pwd
/usr/src/linux-2.6.7
[root@vpc-linux linux-2.6.7]#
[root@vpc-linux linux-2.6.7]#
[root@vpc-linux linux-2.6.7]# tail Makefile
endif # skip-makefile
FORCE:
.PHONY: script
script:
$(SCRIPT)
[root@vpc-linux linux-2.6.7]#
[root@vpc-linux linux-2.6.7]#
[root@vpc-linux linux-2.6.7]# head kernel/extra-exports.c
#include <linux/module.h>
#include <linux/syscalls.h>
EXPORT_SYMBOL(sys_select);
EXPORT_SYMBOL(sys_epoll_create);
EXPORT_SYMBOL(sys_epoll_ctl);
EXPORT_SYMBOL(sys_epoll_wait);
EXPORT_SYMBOL(sys_socket);
[root@vpc-linux linux-2.6.7]#
[root@vpc-linux linux-2.6.7]#
[root@vpc-linux linux-2.6.7]# head -15 kernel/Makefile
#
# Makefile for the linux kernel.
#
obj-y = sched.o fork.o exec_domain.o panic.o printk.o profile.o \
exit.o itimer.o time.o softirq.o resource.o \
sysctl.o capability.o ptrace.o timer.o user.o \
signal.o sys.o kmod.o workqueue.o pid.o \
rcupdate.o intermodule.o extable.o params.o posix-timers.o \
kthread.o
obj-y += extra-exports.o
obj-$(CONFIG_FUTEX) += futex.o
obj-$(CONFIG_GENERIC_ISA_DMA) += dma.o
[root@vpc-linux linux-2.6.7]#
\endverbatim
*
* Then you must rebuild the kernel.
* If you fail to do this, you won't be able to <b>insmod</b> pjlib.
*
* \note You will see a lots of warning messages during pjlib-test compilation.
* The warning messages complain about unresolved symbols which are defined
* in pjlib module. You can safely ignore these warnings. However, you can not
* ignore warnings about non-pjlib unresolved symbols.
*
*
* @subsection makefile_explained_sec Makefile Explained
*
* The \a Makefile for each project (e.g. PJLIB, PJSIP, etc) should be
* very similar in the contents. The Makefile is located under \c build
* directory in each project subdir.
*
* @subsubsection pjlib_makefile_subsec PJLIB Makefile.
*
* Below is PJLIB's Makefile:
*
* \include build/Makefile
*
* @subsubsection pjlib_os_makefile_subsec PJLIB os-linux.mak.
*
* Below is file <tt><b>os-linux.mak</b></tt> file in
* <tt>$PJPROJECT/pjlib/build</tt> directory,
* which is OS specific configuration file for Linux target that is specific
* for PJLIB project. For \b global OS specific configuration, please see
* <tt>$PJPROJECT/build/os-*.mak</tt>.
*
* \include build/os-linux.mak
*
*/
/*////////////////////////////////////////////////////////////////////////// */
/*
PORTING PJLIB
*/
/**
* @page porting_pjlib_pg Porting PJLIB
*
* \note
* <b>Since version 0.5.8, PJLIB build system is now based on autoconf, so
* most of the time we shouldn't need to apply the tweakings below to get
* PJLIB working on a new platform. However, since the autoconf build system
* still uses the old Makefile build system, the information below may still
* be useful for reference.
* </b>
*
* @section new_arch_sec Porting to New CPU Architecture
*
* Below is step-by-step guide to add support for new CPU architecture.
* This sample is based on porting to Alpha architecture; however steps for
* porting to other CPU architectures should be pretty similar.
*
* Also note that in this example, the operating system used is <b>Linux</b>.
* Should you wish to add support for new operating system, then follow
* the next section \ref porting_os_sec.
*
* Step-by-step guide to port to new CPU architecture:
* - decide the name for the new architecture. In this case, we choose
* <tt><b>alpha</b></tt>.
* - edit file <tt>$PJPROJECT/build.mak</tt>, and add new section for
* the new target:
* <pre>
* #
* # Linux alpha, gcc
* #
* export MACHINE_NAME := <b>alpha</b>
* export OS_NAME := linux
* export CC_NAME := gcc
* export HOST_NAME := unix
* </pre>
*
* - create a new file <tt>$PJPROJECT/build/<b>m-alpha</b>.mak</tt>.
* Alternatively create a copy from other file in this directory.
* The contents of this file will look something like:
* <pre>
* export M_CFLAGS := $(CC_DEF)<b>PJ_M_ALPHA=1</b>
* export M_CXXFLAGS :=
* export M_LDFLAGS :=
* export M_SOURCES :=
* </pre>
* - create a new file <tt>$PJPROJECT/pjlib/include/pj/compat/<b>m_alpha.h</b></tt>.
* Alternatively create a copy from other header file in this directory.
* The contents of this file will look something like:
* <pre>
* #define PJ_HAS_PENTIUM 0
* #define PJ_IS_LITTLE_ENDIAN 1
* #define PJ_IS_BIG_ENDIAN 0
* </pre>
* - edit <tt>pjlib/include/pj/<b>config.h</b></tt>. Add new processor
* configuration in this header file, like follows:
* <pre>
* ...
* #elif defined (PJ_M_ALPHA) && PJ_M_ALPHA != 0
* # include <pj/compat/m_alpha.h>
* ...
* </pre>
* - done. Build PJLIB with:
* <pre>
* $ cd $PJPROJECT/pjlib/build
* $ make dep
* $ make clean
* $ make
* </pre>
*
* @section porting_os_sec Porting to New Operating System Target
*
* This section will try to give you rough guideline on how to
* port PJLIB to a new target. As a sample, we give the target a name tag,
* for example <tt><b>xos</b></tt> (for X OS).
*
* @subsection new_compat_os_h_file_sec Create New Compat Header File
*
* You'll need to create a new header file
* <b><tt>include/pj/compat/os_xos.h</tt></b>. You can copy as a
* template other header file and edit it accordingly.
*
* @subsection modify_config_h_file_sec Modify config.h
*
* Then modify file <b><tt>include/pj/config.h</tt></b> to include
* this file accordingly (e.g. when macro <tt><b>PJ_XOS</b></tt> is
* defined):
*
\verbatim
...
#elif defined(PJ_XOS)
# include <pj/compat/os_xos.h>
#else
#...
\endverbatim
*
* @subsection new_target_mak_file_sec Create New Global Make Config File
*
* Then you'll need to create global configuration file that
* is specific for this OS, i.e. <tt><b>os-xos.mak</b></tt> in
* <tt><b>$PJPROJECT/build</b></tt> directory.
*
* At very minimum, the file will normally need to define
* <tt><b>PJ_XOS=1</b></tt> in the \c CFLAGS section:
*
\verbatim
#
# $PJPROJECT/build/os-xos.mak:
#
export OS_CFLAGS := $(CC_DEF)PJ_XOS=1
export OS_CXXFLAGS :=
export OS_LDFLAGS :=
export OS_SOURCES :=
\endverbatim
*
*
* @subsection new_target_prj_mak_file_sec Create New Project's Make Config File
*
* Then you'll need to create xos-specific configuration file
* for PJLIB. This file is also named <tt><b>os-xos.mak</b></tt>,
* but its located in <tt><b>pjlib/build</b></tt> directory.
* This file will specify source files that are specific to
* this OS to be included in the build process.
*
* Below is a sample:
\verbatim
#
# pjlib/build/os-xos.mak:
# XOS specific configuration for PJLIB.
#
export PJLIB_OBJS += os_core_xos.o \
os_error_unix.o \
os_time_ansi.o
export TEST_OBJS += main.o
export TARGETS = pjlib pjlib-test
\endverbatim
*
* @subsection new_target_src_sec Create and Edit Source Files
*
* You'll normally need to create at least these files:
* - <tt><b>os_core_xos.c</b></tt>: core OS specific
* functionality.
* - <tt><b>os_timestamp_xos.c</b></tt>: how to get timestamp
* in this OS.
*
* Depending on how things are done in your OS, you may need
* to create these files:
* - <tt><b>os_error_*.c</b></tt>: how to manipulate
* OS error codes. Alternatively you may use existing
* <tt>os_error_unix.c</tt> if the OS has \c errno and
* \c strerror() function.
* - <tt><b>ioqueue_*.c</b></tt>: if the OS has specific method
* to perform asynchronous I/O. Alternatively you may
* use existing <tt>ioqueue_select.c</tt> if the OS supports
* \c select() function call.
* - <tt><b>sock_*.c</b></tt>: if the OS has specific method
* to perform socket communication. Alternatively you may
* use existing <tt>sock_bsd.c</tt> if the OS supports
* BSD socket API, and edit <tt>include/pj/compat/socket.h</tt>
* file accordingly.
*
* You will also need to check various files in
* <tt><b>include/pj/compat/xxx.h</b></tt>, to see if they're
* compatible with your OS.
*
* @subsection new_target_build_file_sec Build The Project
*
* After basic building blocks have been created for the OS, then
* the easiest way to see which parts need to be fixed is by building
* the project and see the error messages.
*
* @subsection new_target_edit_vs_new_file_sec Editing Existing Files vs Creating New File
*
* When you encounter compatibility errors in PJLIB during porting,
* you have three options on how to fix the error:
* - edit the existing <tt>*.c</tt> file, and give it <tt>#ifdef</tt>
* switch for the new OS, or
* - edit <tt>include/pj/compat/*.h</tt> instead, or
* - create a totally new file.
*
* Basicly there is no strict rule on which approach is the best
* to use, however the following guidelines may be used:
* - if the file is expected to be completely different than
* any existing file, then perhaps you should create a completely
* new file. For example, file <tt>os_core_xxx.c</tt> will
* normally be different for each OS flavour.
* - if the difference can be localized in <tt>include/compat</tt>
* header file, and existing <tt>#ifdef</tt> switch is there,
* then preferably you should edit this <tt>include/compat</tt>
* header file.
* - if the existing <tt>*.c</tt> file has <tt>#ifdef</tt> switch,
* then you may add another <tt>#elif</tt> switch there. This
* normally is used for behaviors that are not totally
* different on each platform.
* - other than that above, use your own judgement on whether
* to edit the file or create new file etc.
*/
#endif /* __PJ_DOXYGEN_H__ */